| 关于缩套圆筒过盈量的研究 |
| |
| 引用本文： | 张于贤.关于缩套圆筒过盈量的研究[J].机械研究与应用,2006,19(5):74-75. |
| |
| 作者姓名： | 张于贤 |
| |
| 作者单位： | 桂林电子工业学院,广西 桂林 541004 |
| |
| 摘 要： | 根据Tresca理论.对同种材料组成的缩套圆筒．首先确定容器内筒内壁及外筒内壁的相当应力，然后根据二者相当应力相等这一设计准则．即可确定缩套圆筒的最佳过盈量，为缩套圆筒的设计提供一定的理论依据。
|
| 关 键 词： | 缩套圆筒 过盈量 界面压力 相当压力 |
| 文章编号： | 1007-4414(2006)05-0074-02 |
| 修稿时间： | 2006年5月25日 |
The research on amount of interference for shrink-on cylinder |
| |
| Zhang Yu-xian.The research on amount of interference for shrink-on cylinder[J].Mechanical Research & Application,2006,19(5):74-75. |
| |
| Authors: | Zhang Yu-xian |
| |
| Abstract: | First,the equivalent stress in inner wall at inside cylinder and inner wall at outside cylinder of vessel were determined according to the theory of tresca for the shrink-on cylinder composed by the same material.And then the optimize amount of interference could be determined according to a design rule that both the equivalent stress were equivalent.The theoretic evidence is provided to a certain extent for the design of the shrink-on cylinder. |
| |
| Keywords: | shrink-on cylinder amount of interference interface pressure equivalent pressure |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
