| 基于USB的快速成形控制系统的研究与开发 |
| |
| 引用本文： | 王华斌.基于USB的快速成形控制系统的研究与开发[J].机械,2006,33(4):35-37. |
| |
| 作者姓名： | 王华斌 |
| |
| 作者单位： | 上海交通大学,CIM研究所RP/RE实验室,上海,200030 |
| |
| 摘 要： | 提出了PC＋USB接口控制卡构成的上下位机式的快速成形控制系统方案，介绍了系统的硬件结构及其软件的实现方法。系统采用Cypress公司生产的一款高性能的USB2．0处理器CY7C68013作为USB接口芯片和下位机处理单元，实践证明该处理器满足系统的要求。
|
| 关 键 词： | 快速成形 控制系统 |
| 文章编号： | 1006-0316（2006）04-0035-03 |
| 收稿时间： | 2005-11-12 |
| 修稿时间： | 2005-11-12 |
Research and development of USB -based control system for Rapid Prototyping |
| |
| WANG Hua-bin.Research and development of USB -based control system for Rapid Prototyping[J].Machinery,2006,33(4):35-37. |
| |
| Authors: | WANG Hua-bin |
| |
| Affiliation: | RP/RE Lab. of CIM Research Institute of SJTU, Shanghai 200030, China |
| |
| Abstract: | It is proposed that a control system for Rapid Prototyping composed of PC and control card based USB interface. The hardware structure of the system and ways of software design is introduced in this paper. CY7C68013 is used as USB interface chip and process unit in this system, it is a high-powered USB2.0 processor produced by Cypress Semiconductor Corporation. It is proved that the chip is fit to this system in practice. |
| |
| Keywords: | USB2 0 EZ-USB CY7C68013 |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
