首页 | 本学科首页   官方微博 | 高级检索  
     

硬密封球阀耐冲蚀陶瓷涂层研究
引用本文:查柏林,王汉功,徐可为.硬密封球阀耐冲蚀陶瓷涂层研究[J].润滑与密封,2005(4):24-26.
作者姓名:查柏林  王汉功  徐可为
作者单位:1. 西安交通大学,西安,710049;第二炮兵工程学院,西安,710025
2. 第二炮兵工程学院,西安,710025
3. 西安交通大学,西安,710049
摘    要:利用多功能超音速火焰喷涂技术,在金属硬密封球阀的阀芯上制备了WC-12Co金属陶瓷涂层,用于提高球阀的耐冲蚀磨损性能。试验表明,涂层机械力学性能好,与基体结合强度超过70MPa,孔隙率小于2%,硬度超过HV1000,耐冲蚀磨损性能比基体提高5倍以上,有效地提高了球阀的使用寿命和密封可靠性。

关 键 词:超音速火焰喷涂  涂层  冲蚀磨损
文章编号:0254-0150(2005)4-024-3
修稿时间:2004年9月6日

Research on Erosion Wear Resistant Coatings of Ball Valve
Zha Bailin,Wang Hangong,XU Kewei.Research on Erosion Wear Resistant Coatings of Ball Valve[J].Lubrication Engineering,2005(4):24-26.
Authors:Zha Bailin  Wang Hangong  XU Kewei
Affiliation:Zha Bailin 1,2 Wang Hangong 2 Xu Kewei 1
Abstract:WC-12 Co coatings were sprayed on the surface of the ball of ball-valve by high velocity oxygen/air fuel spray for improving of erosion wear resistance.The coatings have good performance with high bonding strength,low porosity and high hardness,which is 70 MPa,2%,HV 1 000 respectively.Compared to the substrate,erosion wear resistance of the coatings is enhanced more than 5 times,which improves the seal reliability and life-time of ball valve.
Keywords:high velocity oxygen fuel spray  coatings  erosion wear  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号