| 填料对超高分子量聚乙烯摩擦磨损性能的影响研究 |
| |
| 引用本文： | 陈战,王家序,秦大同,陈敏.填料对超高分子量聚乙烯摩擦磨损性能的影响研究[J].润滑与密封,2001(4):34-35. |
| |
| 作者姓名： | 陈战 王家序 秦大同 陈敏 |
| |
| 作者单位： | 重庆大学机械传动国家重点实验室，400044 |
| |
| 基金项目： | 教育部科学技术重点资助项目（项目编号：99104） |
| |
| 摘 要： | 用MPV－200型摩擦磨损试验机和腐蚀磨损试验机，研究了MoS2,PTEF,石墨，玻璃纤维，碳纤维等填料对超高分子量聚乙烯（UHMW－PE）摩擦磨损性能的影响，结果表明：填充MoS2,PTFE,石墨可降低UHMW－PE的摩擦系数；而添加玻璃纤维则增大了UHMW－PE的摩擦系数，添加碳纤维对UHMW－PE的摩擦系数几乎无影响，同时，添加填料可使UHMW－PE的耐磨性显提高，其中石煌减摩抗磨效果最佳，超高分子量聚乙烯基体的和石墨填料的构成的复合材料，同超高分子量乙烯相比，不仅耐磨性大幅度提高，而且磨擦系数大大降低。
|
| 关 键 词： | 超高分子量聚乙烯 复合材料 填料 摩擦 磨损 性能 |
Study on the Effect of Stuffing on the Friction and Wear Characteristic of Ultra High Molecular Weight Polyethylene |
| |
| Chen Zhan,Wang Jiaxu,Qin Datong,Chen Min.Study on the Effect of Stuffing on the Friction and Wear Characteristic of Ultra High Molecular Weight Polyethylene[J].Lubrication Engineering,2001(4):34-35. |
| |
| Authors: | Chen Zhan Wang Jiaxu Qin Datong Chen Min |
| |
| Abstract: | The friction and wear properties of UHMW-PE composites filled with MoS2, PTFFE, carbon fiber, glass fiber and graphite were studied by using MPV-200 model friction and wear tester and caustic-wear one. Experiment results show that graphite, MoS2 and PTFE reduce the friction coefficient of UHMW-PE, but grass fiber increases the friction coefficient of UHMW-PE, graphite not only reduces the friction coefficient of UHMW-PE, but also can greatly reduce the wear of UHMW-PE. |
| |
| Keywords: | UHMW-PE Stuffing Friction Wear Performance Study |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
