首页 | 本学科首页   官方微博 | 高级检索  
     

油气润滑系统水平管路中环状流的形成过程及特性研究
引用本文:李志宏,孙启国,吕洪波.油气润滑系统水平管路中环状流的形成过程及特性研究[J].润滑与密封,2012,37(7):49-52.
作者姓名:李志宏  孙启国  吕洪波
作者单位:北方工业大学机电工程学院 北京 100144
基金项目:北京市属高等学校人才强教计划资助项目
摘    要:基于两相流基本理论,采用Fluent建立油气润滑系统水平管路中油气两相流的模型,并分析形成环状流的条件。在此基础上,提出新的供油方式,即在润滑油区域有一微小间隙,使压缩空气可直接穿过润滑油中间的空隙;分析新供油方式下形成环状流的条件。结果表明,新的供油方式下油气形成环状流的效率高,环状流液膜均匀性好;在相同供油量情况下,新供油方式形成环状流需要的入口气相速度低,且气速增大时一般不会形成夹带液滴,能够实现较好的环状流流型。

关 键 词:油气润滑  环状流  供油方式  初始条件

The Characteristics and the Shaping Process of the Annular Flow in the Horizontal Pipe of the Oil-gas Lubrication System
Li Zhihong , Sun Qiguo , Lv Hongbo.The Characteristics and the Shaping Process of the Annular Flow in the Horizontal Pipe of the Oil-gas Lubrication System[J].Lubrication Engineering,2012,37(7):49-52.
Authors:Li Zhihong  Sun Qiguo  Lv Hongbo
Affiliation:Li Zhihong Sun Qiguo Lv Hongbo(College of Mechatronical Engineering,North China University of Technology,Beijing 100144,China)
Abstract:According to the basic theory of two phase flows,the model of the two phase flows in the horizontal pipe of the oil-gas lubrication system was established by the Fluent software to analyze the shaping process of the oil-gas annular flow in the oil-gas lubrication system.The condition of shaping the oil-gas annular flow in the system was found,a new oil supply style with a small gap at oil district was put forward,and its condition of shaping the oil-gas annular flow was found.Results show that with the same oil amount,the new oil supply style needs a lower gas velocity in the inlet to shape the annular flow,and the oil drops will not appear in air flow.The new oil supply style has a more efficiency shaping process and a more even of the annular flow than the old one.
Keywords:oil-gas lubrication  annular flow  oil supply style  shaping boundary
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号