碳硫分析仪的故障检查与排除

德国ELTRA碳硫分析仪CS500适用于检测粉末、片状、车屑样等各种材料,如煤炭、油品、钢、水泥、土壤、橡胶。在燃烧过程中,样品中的碳和硫释放生成SO2和CO2。试样通常的燃烧温度在1250℃到1400℃之间。燃烧生成的SO2和CO2在检测池中以红外吸收的原理进行检测。在仪器使用中会遇到很多故障,如分析延时、炉子失控、分析通信中断、载气流量降低和红外池电压超出范围等,需要通过掌握仪器的构造和工作原理逐步检查并排除故障。

Troubleshooting and Exclusion of Carbon and Sulfur Analyzer

German the ELTRA carbon sulfur analyzer CS500 is applicable to the detection of powder,flakes,and turnings like a variety ofmaterials,such as coal,oil,steel,cement,soil,rubber.In the combustion process,carbon and sulfur in the sample release of SO2and CO2.Sample is usually the combustion temperature of1250°C to 1400°C.The combustion of SO2and CO2in theprinciple of detection in the pool to the infrared absorptiondetection.In the instrument will encounter many failures and phenomena need to master the instrument‘s structure andworking principle of step-by-step check and troubleshooting.Failure phenomena encountered in the course of the analysis of delay,the stove out of control,and analysis of communicationinterruption,the carrier gas flow rate decreases and infraredbattery voltage out of range,the analysis by checking the troubleshoot.