| 微线段齿轮的创成方法探讨及其计算机仿真 |
| |
| 引用本文： | 王爱群,冯显英,艾兴.微线段齿轮的创成方法探讨及其计算机仿真[J].机械工程学报,2003,39(1):143-148. |
| |
| 作者姓名： | 王爱群 冯显英 艾兴 |
| |
| 作者单位： | 山东大学机械工程学院,济南,250061 |
| |
| 基金项目： | 国家自然科学基金资助项目(59905018)。 |
| |
| 摘 要： | 研究了微线段齿轮的创成方法,确定了“包络-旋切”两步加工法和加工刀具的选取方法,建立了旋切法数控加工微线段齿轮的运动控制模型,并通过计算机仿真进行了验证。
|
| 关 键 词： | 微线段齿轮 创成方法 数控加工 |
| 修稿时间： | 2002年3月11日 |
STUDY ON GENERATION OF SPECIFIC GEAR AND SIMULATION OF MACHINING PROCESS |
| |
| Wang Aiqun FengXianying AiXing.STUDY ON GENERATION OF SPECIFIC GEAR AND SIMULATION OF MACHINING PROCESS[J].Chinese Journal of Mechanical Engineering,2003,39(1):143-148. |
| |
| Authors: | Wang Aiqun FengXianying AiXing |
| |
| Affiliation: | Shandong University |
| |
| Abstract: | The generation of logix gear tooth profile is studied. "Envelop-rotation tangency " two-step method of NC generation of the logix gear is brought out and the selection principle of the machining cutter is developed. The movement control model of generation of the logix gear based on the rotation tangency machining method is set up. Then the simulation of the machining process is done. |
| |
| Keywords: | Logixgear Generation method CNC |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
