| 二齿差摆线针轮减速器针齿壳内曲线参数优化 |
| |
| 引用本文： | 万朝燕,兆文忠,李力行.二齿差摆线针轮减速器针齿壳内曲线参数优化[J].机械工程学报,2003,39(6):124-127. |
| |
| 作者姓名： | 万朝燕 兆文忠 李力行 |
| |
| 作者单位： | 大连铁道学院机械工程系,大连,116028 |
| |
| 基金项目： | 国家自然科学基金资助项目(50175011) |
| |
| 摘 要： | 以二齿差摆线针轮减速器针齿壳内曲线参数为设计变量,摆线轮处于任意位置均能顺利装入,且针齿壳内曲线不发生干涉为约束条件,针齿壳强度、刚度削弱最小为优化目标,对二齿差摆线针轮减速器针齿壳内曲线参数进行了优化。编制了集优化参数、判定间隙、绘图检验为一体的计算机程序。该程序使用方便,通用性强,对针齿壳的生产制造具有一定的指导意义。
|
| 关 键 词： | 摆线针轮减速器 针齿壳 二齿差摆线轮 优化设计 短幅内摆线 |
| 修稿时间： | 2002年10月9日 |
OPTIMIZATION OF THE CURVE PARAMETERS WITHIN THE PIN GEAR HOUSING IN TWO TEETH DIFFERENCE CYCLOID SPEED-REDUCER |
| |
| Wan Chaoyan Zhao Wenzhong Li Lixing.OPTIMIZATION OF THE CURVE PARAMETERS WITHIN THE PIN GEAR HOUSING IN TWO TEETH DIFFERENCE CYCLOID SPEED-REDUCER[J].Chinese Journal of Mechanical Engineering,2003,39(6):124-127. |
| |
| Authors: | Wan Chaoyan Zhao Wenzhong Li Lixing |
| |
| Affiliation: | Dalian Railway Institute |
| |
| Abstract: | The curve parameters are optimized within the pin gear housing in two teeth difference cycloid speed-reducer. The curve parameters within, the pin gear housing serve as design variables; it is that the cycloid gear can be mounted successfully at any place and the curve is without interference that are regarded as constraints; that the strength and stiffness of the pin gear housing is weaken least serves as optimum objective. A computer program is worked out by which parameters can be optimized, installing clearance can be calculated and drafting figure can be examined. This program can be easy to use in different conditions and it has the instructive significance in making the pin gear housing. |
| |
| Keywords: | Cycloid speed-reducer Pin gear housing Two teeth difference cycloid gear Optimization design |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
