首页 | 本学科首页   官方微博 | 高级检索  
     

点焊熔核形成过程的有限元模型
引用本文:曹彪,姜以宏,王建一. 点焊熔核形成过程的有限元模型[J]. 机械工程学报, 1995, 0(2)
作者姓名:曹彪  姜以宏  王建一
作者单位:华南理工大学,哈尔滨工业大学
摘    要:介绍了模拟点焊熔核形成过程的轴对称电、热、力学有限元模型。提出了点焊过程导电、传热和力学行为之间耦合作用的模拟方法和接触电阻分析方法。模型中也考虑了焊机特性、随温度变化的材料性能以及各种边界冷却条件的影响。试验验证结果表明,数值模拟结果与实际吻合良好。该模型提供了一种有效的点焊过程理论分析手段。

关 键 词:电阻点焊;有限元;数值模型

FINITE ELEMENT MODEL FOR RESISTANCE SPOT WELDING PROCESS
Cao Biao. FINITE ELEMENT MODEL FOR RESISTANCE SPOT WELDING PROCESS[J]. Chinese Journal of Mechanical Engineering, 1995, 0(2)
Authors:Cao Biao
Affiliation:Cao Biao(South China University of Technology)Jiang Yihong;Wang Jianyi(Harbin Institute of Technology)
Abstract:An axisymmetric finite element electro-thermo-mechanical model for resistance spot welding process is introduced. A simulation method of the interaction of electrical,thermal and mechanical factors is presented. A calculation method of contact resistance is provided. The influence of the electrical and mechanical parameters of welding machine,the temperature dependent material properties and verious cooling boundary condition on welding process is also taken into account in the model. Experimental verification shows that the model prediction agrees well with the practical.The model provides an useful theorious tool for the analysis of resistance spot welding process.
Keywords:Resistance spot welding Finite element Numerical model  
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号