| PDC刀具切削参数对切削力和表面粗糙度的影响 |
| |
| 引用本文： | 王进保,李立惟,姜伟,李吉刚.PDC刀具切削参数对切削力和表面粗糙度的影响[J].工具技术,2010,44(10):26-29. |
| |
| 作者姓名： | 王进保 李立惟 姜伟 李吉刚 |
| |
| 作者单位： | 1. 国家特种矿物材料工程技术研究中心
2. 广西超硬材料研究开发重点实验室 |
| |
| 基金项目： | 广西区直科技型企业科研成果转化资金资助项目(2009-1-3); 广西科学研究与技术开发计划资助项目(桂科攻0996005) |
| |
| 摘 要： | 研究了PDC刀具的切削参数对切削力和表面粗糙度的影响。结果表明进给量和背吃刀量是影响切削力的主要因素,切削速度对切削力的影响较小。小进给量、高切削速度有助于提高工件表面光洁度。
|
| 关 键 词： | 金刚石复合片 PDC刀具 切削力 表面粗糙度 |
Influence of PDC Reamer Cutting Parameter on Cutting Strength and Coarseness Degree |
| |
| Wang Jinbao,Li Liwei,Jiang Wei,Li Jigang.Influence of PDC Reamer Cutting Parameter on Cutting Strength and Coarseness Degree[J].Tool Engineering(The Magazine for Cutting & Measuring Engineering),2010,44(10):26-29. |
| |
| Authors: | Wang Jinbao Li Liwei Jiang Wei Li Jigang |
| |
| Affiliation: | Wang Jinbao,Li Liwei,Jiang Wei,Li Jigang Wang Jinbao,Senior Engineer,National Engineering & Technology Research Center of Special Mineral Materials,Guilin 541000,China |
| |
| Abstract: | This paper studied the influence of PDC reamer cutting parameter on cutting strength and coarseness degree. The results show that the speed of moving reamer and the deep of reamer acception are the main influencing factor,and the cutting speed influence little. Little deep of reamer acception and high cutting speed can improve the surface coarseness degree. |
| |
| Keywords: | polycrystalline diamond compact PDC reamer cutting strength surface coarseness degree |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
