对齿轮凸形齿测量结果进行二次最小二乘曲线拟合的误差评值方法 |
| |
引用本文: | 周广才.对齿轮凸形齿测量结果进行二次最小二乘曲线拟合的误差评值方法[J].工具技术,1993(5). |
| |
作者姓名: | 周广才 |
| |
作者单位: | 哈尔滨量具刃具厂量仪研究所 150040 |
| |
摘 要: | 本文给出了对凸形齿测量结果进行二次最小二乘回归抛物线拟合的数据处理及误差评定的方法。该方法对测量结果进行二次最小二乘回归,分离出齿形形状误差、齿形角误差、最大鼓形量和最大鼓形位置。
|
关 键 词: | 二次最小二乘 形状误差 最大鼓形量 齿形角误差 |
The Evaluation Method for Convex Teeth of a Involute Gear Using the Secondary Least Square Curve Fitting |
| |
Abstract: | This paper provides both the data processing method used to evaluate the tooth form of convex-teeth of a involute gear by means of availing secondary least square regression, and the error analysis method. The tooth-shape error, tooth-angle error, the maximum drum and its actual position may be obtained using presented method. |
| |
Keywords: | |
本文献已被 CNKI 等数据库收录! |