| 基于正交试验法的三坐标测量机直接计算机控制（DCC）参数优化选择 |
| |
| 引用本文： | 盛立,费业泰,张梅,杨洪涛.基于正交试验法的三坐标测量机直接计算机控制（DCC）参数优化选择[J].工具技术,2009,43(5):98-101. |
| |
| 作者姓名： | 盛立 费业泰 张梅 杨洪涛 |
| |
| 作者单位： | 合肥工业大学 |
| |
| 基金项目： | 台湾行政院国家科学委员会资助项目 |
| |
| 摘 要： | 为了实现三坐标测量机高速度、高效率、高精度测量，需要对测量机动态测量直接计算机控制（DCC）参数进行优化选择。本文使用正交试验方法确定测量机DCC参数最优组合，实现了以较少的试验分析各参数对测量精度的影响以及参数的优化选择。
|
| 关 键 词： | 三坐标测量机 DCC参数 正交试验法 动态误差 |
Optimum Selection of Direct Computer Control Parameters of CMM Based on Orthogonal Test Method |
| |
| Sheng Li,Postgraduate,School of Instrument Science , Optoelectric Engineering,Hefei University of Technology,Hefei,Anhui ,China Fei Yetai Zhang Mei et al.Optimum Selection of Direct Computer Control Parameters of CMM Based on Orthogonal Test Method[J].Tool Engineering(The Magazine for Cutting & Measuring Engineering),2009,43(5):98-101. |
| |
| Authors: | Sheng Li Postgraduate School of Instrument Science Optoelectric Engineering Hefei University of Technology Hefei Anhui China Fei Yetai Zhang Mei |
| |
| Affiliation: | Sheng Li,Postgraduate,School of Instrument Science , Optoelectric Engineering,Hefei University of Technology,Hefei,Anhui 230009,China Fei Yetai Zhang Mei et al |
| |
| Abstract: | In order to achieve high speed,high efficiency and high precision in dynamic measure of three-dimensional coordinate measuring machine,the dynamic direct computer control parameters of CMM need to be optimum selected.the influence of every DCC parameters on the CMM dynamic measurement precision is analyzed with orthogonal test method and the optimum DCC parameters are selected by fewer experiments. |
| |
| Keywords: | coordinate measuring machine(CMM) direct computer control parameter orthogonal test method dynamic error |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
