| 锥齿轮齿距及齿形偏差测量与分析方法 |
| |
| 引用本文： | 郭晓东,张明德,张卫青,徐娟,孙秀文.锥齿轮齿距及齿形偏差测量与分析方法[J].工具技术,2009,43(11):80-83. |
| |
| 作者姓名： | 郭晓东 张明德 张卫青 徐娟 孙秀文 |
| |
| 作者单位： | 1. 汽车零部件制造及检测技术教育部重点实验室(重庆工学院)
2. 哈尔滨量具刃具集团有限责任公司 |
| |
| 基金项目： | 国家自然科学基金资助项目，国家科技支撑计划资助课题，重庆市重点自然科学基金资助项目 |
| |
| 摘 要： | 研究了基于齿轮测量中心的锥齿轮齿距偏差和齿形偏差测量与分析方法及其实现技术。该方法应用齿轮啮合理论，根据锥齿轮齿面成形方法，建立了齿面几何参数计算模型；在齿面上建立测量网格，控制齿轮测量中心四轴运动使齿面和测头于测量网格点接触，采集实际坐标轴及测头读数；应用B样条法构造实际齿面，计算其齿形偏差。在此基础上，开发了基于哈量集团公司制造的390X系列齿轮测量中心的实现软件系统。30家锥齿轮制造企业实际应用表明，该软件系统为提高锥齿轮精度、减小齿形偏差提供了先进的测量与分析手段。
|
| 关 键 词： | 锥齿轮 齿距偏差 齿形偏差 齿轮测量中心 |
Measuring and Analysis of Pitch Deviation and Tooth Form Deviation of Bevel Gear |
| |
| Guo Xiaodong,Zhang Mingde,Zhang Weiqing,Xu Juan,Sun Xiuwen.Measuring and Analysis of Pitch Deviation and Tooth Form Deviation of Bevel Gear[J].Tool Engineering(The Magazine for Cutting & Measuring Engineering),2009,43(11):80-83. |
| |
| Authors: | Guo Xiaodong Zhang Mingde Zhang Weiqing Xu Juan Sun Xiuwen |
| |
| Affiliation: | Guo Xiaodong,Zhang Mingde,Zhang Weiqing,Xu Juan,Sun Xiuwen Researcher,Key Laboratory of Manufacture and Test Techniques for Automobile Parts,Ministry of Education(Chongqing Institute of Technology),Chongqing 400050,China |
| |
| Abstract: | The method and the implement of pitch deviation and tooth form deviation measuring of bevel gear on the gear measuring center are studied. The mathematical tooth form model is built by applying the gear meshing theory according to various cutting methods. The measuring grid is set up in the working area of tooth face and the probe is driven to move to contact with tooth surface at the grid points. The B-Spline method is applied to construct the measured tooth flank and the tooth form deviation is then calcu... |
| |
| Keywords: | bevel gear pitch deviation tooth form deviation gear measuring center |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
