| 非数控加工特种回转铣刀的通用求解模型 |
| |
| 引用本文： | 韩成顺,唐余勇,董申.非数控加工特种回转铣刀的通用求解模型[J].工具技术,2002,36(2):24-26. |
| |
| 作者姓名： | 韩成顺 唐余勇 董申 |
| |
| 作者单位： | 哈尔滨工业大学 |
| |
| 摘 要： | 为降低特种回转铣刀的加工成本 ,给出了基于非数控加工方案的特种回转铣刀刃口曲线通用数学模型 ,讨论了轴向和径向相对进给运动的实现方法 ,并给出了两种典型特种回转铣刀的求解实例
|
| 关 键 词： | 特种回转铣刀 非数控加工 刃口曲线 数学模型 相对进给运动 |
General Solution Model of Non-NC Machining of Special Revolving Milling Cutters |
| |
| Han Chengshun,Tang Yuyong,Dong Shen.General Solution Model of Non-NC Machining of Special Revolving Milling Cutters[J].Tool Engineering(The Magazine for Cutting & Measuring Engineering),2002,36(2):24-26. |
| |
| Authors: | Han Chengshun Tang Yuyong Dong Shen |
| |
| Affiliation: | Han Chengshun Tang Yuyong Dong Shen |
| |
| Abstract: | To reduce the production costs of special revolving milling cutters, the general mathematical model of the cutting edge of special revolving milling cutters based on the non NC machining process is presented. The realizing methods of relative feed movements are discussed, and solution examples of two kinds of typical special revolving milling cutters are given. |
| |
| Keywords: | special revolving milling cutter non NC machining cutting edge curve mathematical model relative feed movement |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
