| 弯道零件的斜孔加工 |
| |
| 引用本文： | 叶松涛.弯道零件的斜孔加工[J].工具技术,2012,46(3):48-49. |
| |
| 作者姓名： | 叶松涛 |
| |
| 作者单位： | 许昌烟草机械有限责任公司 461000 河南省许昌市 |
| |
| 摘 要： | 对于零件弯道的两个3空间斜孔,原通过组合夹具定位后,采用划线加工,加工质量不能满足图纸要求。针对该问题,指出了划线加工的不足,并采用新的加工方法,即在立卧转换加工中心上,开发并运用其潜在的"循环19(即零点跟踪)"功能,从而显著提高了整机的性能。
|
| 关 键 词： | 弯道 空间斜孔 组合夹具 划线钻孔 零点追踪 |
Oblique Hole Machining of the Bend Part |
| |
| Ye Songtao.Oblique Hole Machining of the Bend Part[J].Tool Engineering(The Magazine for Cutting & Measuring Engineering),2012,46(3):48-49. |
| |
| Authors: | Ye Songtao |
| |
| Affiliation: | Ye Songtao,Xuchang Tobacco Machinery Co.,Ltd,Xuchang,Henan 461000,China |
| |
| Abstract: | Two φ3 space oblique holes of the part bend was machined by marking out originally through the combination fixture after being positioned.The quality of machining has not met the drawing requirements.Aiming at the existing problem,this article has pointed out the drawback and defect of marking out machining.And then adopting the machining method,on the vertical and horizontal conversion machining center,by developing and applying its latent "cycle 19(zero-point tracing)" function.So it obviously enhances the performance of the whole machine. |
| |
| Keywords: | bend space oblique hole combination fixture mark out drilling zero-point tracing |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
