| 数控车床夹具的改进 |
| |
| 引用本文： | 吴志平,孙 磊,杨明亮.数控车床夹具的改进[J].哈尔滨轴承,2014(1):13-14. |
| |
| 作者姓名： | 吴志平 孙 磊 杨明亮 |
| |
| 作者单位： | 哈尔滨哈轴精密轴承制造有限公司,黑龙江哈尔滨150036 |
| |
| 摘 要： | 数控车床现有夹具为整体式设计,不仅成本高,制造困难,而且加工范围小。针对以上问题,对夹具进行了改进设计,变整体式夹具为分体式夹具,节省了成本,扩大了加工范围和通用性。
|
| 关 键 词： | 数控车床 三爪自定心夹具 圆柱形夹块 螺栓 |
Improvement of NC lathe ifxture |
| |
| Wu Zhiping,Sun Lei,Yang Mingliang.Improvement of NC lathe ifxture[J].JOurnal of Harbin Bearing,2014(1):13-14. |
| |
| Authors: | Wu Zhiping Sun Lei Yang Mingliang |
| |
| Affiliation: | (Harbin Hazhou Precision Bearing Manufacturing Co.,Ltd.,Harbin 150036,China ) |
| |
| Abstract: | The existing ifxture of lathes is of overall design, not only the high cost, manufacturing dififculty, but also processing range small. The ifxture has been improved for the above problems, form the overall design to separate design, so as to save cost, expand processing range and universality. |
| |
| Keywords: | NC lathe three jaw self-centering ifxture cylindrical ifxture block bolt |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
