| 面向大规模定制的夹具优化设计系统 |
| |
| 引用本文： | 倪丽君,陈蔚芳.面向大规模定制的夹具优化设计系统[J].机械与电子,2007(1):26-30. |
| |
| 作者姓名： | 倪丽君 陈蔚芳 |
| |
| 作者单位： | 南京航空航天大学机电学院,江苏,南京,210016 |
| |
| 摘 要： | 针对大规模定制生产环境下夹具相似性的特点,提出了以工件的加工变形最小和变形最均匀为目标的夹具优化设计方法.基于SolidWorks平台,以VC为开发工具,采用遗传算法和有限元方法相结合的优化方法,开发了参数化夹具优化设计系统,并进行了验证.
|
| 关 键 词： | 大规模定制 夹具设计 遗传算法 有限元法 优化 面向大规模定制 夹具 优化设计系统 Mass Customization Fixture Design Optimization 验证 参数化 开发工具 优化方法 结合 有限元方法 遗传算法 平台 SolidWorks 设计方法 目标 均匀 加工变形 最小 |
| 文章编号： | 1001-2257（2007）01-0026-05 |
| 修稿时间： | 2006-08-14 |
Research on Optimization of Fixture Design for Mass Customization |
| |
| NI Li-jun,CHEN Wei-fang.Research on Optimization of Fixture Design for Mass Customization[J].Machinery & Electronics,2007(1):26-30. |
| |
| Authors: | NI Li-jun CHEN Wei-fang |
| |
| Affiliation: | College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016 ,China |
| |
| Abstract: | Based on the similarity of fixture for mass customization,an optimization method of fixture design aiming at reducing the value machining deformation and increasing the distributing uniformity of deformation is presented.And a parameterized optimization system of fixture design based on SolidWorks software using VC as development tool and genetic algorithm connected with finite element method as optimization mean is carried out and validated. |
| |
| Keywords: | mass customization fixture design genetic algorithm finite element optimization |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
