| 基于Pro/Engineer的三维零件模型的参数化设计 |
| |
| 引用本文： | 杨青,陈东祥,胡冬梅.基于Pro/Engineer的三维零件模型的参数化设计[J].机械设计,2006,23(9):53-57. |
| |
| 作者姓名： | 杨青 陈东祥 胡冬梅 |
| |
| 作者单位： | 1. 天津理工大学,机械系,天津,300191
2. 天津大学,机械工程学院,天津,300072 |
| |
| 摘 要： | 在Pro／Engineer三维特征建模原理的基础上，利用Pro／Engineer具有全相关性、单一数据库等特点，详细研究了利用Pro／Engineer二次开发工具Pro／Toolkit进行参数化二次开发的原理、方法以及实现的关键技术，延伸和扩展了Pro／Engineer软件的参数化功能，实现了3D零件模型的二次开发，并给出了工程应用实例。
|
| 关 键 词： | 参数化设计 二次开发 |
| 文章编号： | 1001-2354（2006）09-0053-05 |
| 收稿时间： | 2006-01-25 |
| 修稿时间： | 2006-01-252006-06-09 |
Parameterized design of 3D component model based on Pro/Engineering |
| |
| YANG Qing,CHEN Dong-xiang,HU Dong-mei.Parameterized design of 3D component model based on Pro/Engineering[J].Journal of Machine Design,2006,23(9):53-57. |
| |
| Authors: | YANG Qing CHEN Dong-xiang HU Dong-mei |
| |
| Affiliation: | Tianjin University of Science and Engineering, Tianjin 300191, China; 2. Tianjin University, Tianjin 300072, China |
| |
| Abstract: | On the basis of the principle of Pro/Engineering 3D characteristic modeling and utilizing the distinguishing features of entire correlation and unitary database etc. possessed by Pro/Engineering, and by the use of secondary development tool Pro/Toolkit of Pro/Engineering, the principle, method and key technique of realization for carrying out the parameterized secondary development was studied in detail. The parameterized function of Pro/Engineering software was extended and broadened, the secondary development of 3D component model was realized and a living example of engineering application was presented. |
| |
| Keywords: | Pro/Engineer Pro/Toolkit |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
