首页 | 本学科首页   官方微博 | 高级检索  
     

基于CCD成像的轴承滚柱表面缺陷智能检测的研究
引用本文:蔡善乐,刘桂兰,杨松彬.基于CCD成像的轴承滚柱表面缺陷智能检测的研究[J].机电一体化,2009(2):68-69.
作者姓名:蔡善乐  刘桂兰  杨松彬
作者单位:兰州理工大学机电工程学院,兰州,730050
摘    要:提出了一种基于CCD成像的轴承滚柱表面缺陷非接触检测技术。CCD将目标转换为视频信号并输送到图像采集卡,图像采集卡对视频信号进行解析、数字化后输送给专用的图像处理系统,对图像进行处理,再用LabVIEW软件编程。

关 键 词:CCD  轴承滚柱  表面缺陷  LabVIEW

The Research of the Defective Detection System of Surface of Roller Bearing on the Basis of CCD Imaging
Abstract:In this paper the author given a non-contact roller bearings surface defects detection system which based on CCD imaging. CCD converts target to the video signal and transmits to the image acquisition cards, the image acquisition card process video signal analytical,digital and transmit the signal to the special image processing system. Processing image pretreatment, and then programming by LabVIEW software.
Keywords:CCD
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号