首页 | 本学科首页   官方微博 | 高级检索  
     

405/Q245R不锈钢复合板焊接工艺及接头组织与性能
引用本文:陈忱,王少刚,翟伟国,吴淑玉,俞旷.405/Q245R不锈钢复合板焊接工艺及接头组织与性能[J].压力容器,2011,28(8):16-21.
作者姓名:陈忱  王少刚  翟伟国  吴淑玉  俞旷
作者单位:南京航空航天大学材料科学与技术学院,江苏南京,210016
摘    要:分别采用钨极氩弧焊(TIG)、选用ER309L焊丝和焊条电弧焊(SMAW)、选用A302焊条两种不同工艺焊接405/Q245R不锈钢复合板的覆层和过渡层,并采用焊条电弧焊方法、选用E4315焊条焊接其基层。对复合板接头进行力学性能测试,结果表明,接头的抗拉强度接近于母材本身强度,拉伸试样断裂均发生于母材部位;对接头金相组织的观察显示,两种接头的过渡层焊缝组织均为奥氏体加少量铁素体,在过渡层焊缝/基层母材侧界面未发生明显的碳迁移现象;进一步对过渡层焊缝进行XRD测定,未发现接头焊缝中有害相的生成,说明获得接头的性能良好,焊接工艺可行,能够满足工程实际需要。

关 键 词:不锈钢复合板  焊接工艺  微观组织  力学性能

Welding Technology of 405/Q245R Stainless Steel Composite Plate and Microstructure and Mechanical Properties of Welded Joint
CHEN Chen,WANG Shao-gang,ZHAI Wei-guo,WU Shu-yu,YU Kuang.Welding Technology of 405/Q245R Stainless Steel Composite Plate and Microstructure and Mechanical Properties of Welded Joint[J].Pressure Vessel Technology,2011,28(8):16-21.
Authors:CHEN Chen  WANG Shao-gang  ZHAI Wei-guo  WU Shu-yu  YU Kuang
Affiliation:CHEN Chen,WANG Shao-gang,ZHAI Wei-guo,WU Shu-yu,YU Kuang (College of Material Science and Technology,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China)
Abstract:The cladding metal and transition region of 405/Q245R stainless steel composite plate are welded by tungsten inert gas arc welding(TIG) with ER309L welding wire and by shielded metal arc welding(SMAW) with A302 electrode respectively,and the base layer is welded by SMAW with E4315 electrode.Results of mechanical properties test show that the tensile strength of welded joints is similar with the strength of base metal,and all the tensile samples broke at the position of base material.Metallograph observation...
Keywords:stainless steel composite plate  welding technology  microstructure  mechanical properties  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号