| Abstract: | To evaluate the fill of internal resorption cavities obturated with thermoplasticized gutta‐percha and GuttaFlow2 using CT scan. Twenty human maxillary anterior teeth were selected and root canals were prepared using ProTaper system to size F3. Irrigation was performed with 5 ml of 2.5% sodium hypochlorite (NaOCl) and 5 ml of 17% ethylenediaminetetraacetic acid (EDTA). Each root was then sectioned horizontally into two halves and semicircular cavities were prepared around the periphery of the root canal opening of each root half, using a round bur. Both the root halves were then fixed using cyanoacrylate glue. All the specimens were subjected to preoperative CT scan analysis to determine the volume of internal cavities. The samples were then randomly divided into two groups. In Group 1, the specimens were obturated with thermoplasticized gutta‐percha (E&Q system) and specimens in Group 2 were obturated using GuttaFlow2. All specimens were then subjected to postoperative CT scan analysis. The volume of voids in internal resorptive cavities were calculated, which was then used to estimate the amount of gutta‐percha filled. There was no significant difference in volume of internal resorptive cavities between thermoplasticized gutta‐percha and GuttaFlow2 groups before obturation (p = 0.466). However, after obturation there was a significant difference between both the groups, in which GuttaFlow2 demonstrated better fill (p = .014). Thermoplasticized gutta‐percha filled 81% of internal resorptive cavity while GuttaFlow2 filled 91%, respectively. GuttaFlow2 showed better fill than thermoplasticized gutta‐percha in the filling of internal resorptive cavities. |
