首页 | 本学科首页   官方微博 | 高级检索  
     

基于数字微镜器件的并行彩色共聚焦测量系统
引用本文:张一,余卿,张昆,程方,崔长彩.基于数字微镜器件的并行彩色共聚焦测量系统[J].光学精密工程,2020(4):859-866.
作者姓名:张一  余卿  张昆  程方  崔长彩
作者单位:华侨大学机电及自动化学院;华侨大学制造工程研究院
基金项目:国家自然科学基金资助项目(No.51505162);福建省科技计划项目(No.2019I0013);泉州市科技计划项目(No.2017T004);华侨大学研究生科研创新基金资助项目(No.18013080064)。
摘    要:彩色共聚焦技术因其高分辨率、高测速的特点,在表面形貌测量领域备受关注,然而现有的彩色共聚焦技术多为单点测量,一定程度上限制了测量效率。本文在彩色共聚焦技术的基础上,以DMD作为光分束器件,结合自主研发的大口径色散管镜,利用面阵彩色相机作为光电接收器件,研究和建立了基于数字微镜器件的并行彩色共聚焦实验平台,实现了对被测物面上多个探测点的并行图像处理。最终,利用所搭建的并行彩色共聚焦测量系统,对50μm高的台阶和自制台阶进行了测量,并对硬币的表面形貌进行了三维恢复。实验结果表明,该测量系统的轴向测量范围为300μm,测量精度达到微米级;同时,能够较好地恢复硬币的表面形貌特征,具有较好的测量效率与可靠性。

关 键 词:光学测量  彩色共聚焦技术  数字微镜器件  彩色相机  表面形貌三维重构

Parallel chromatic confocal measurement system based on digital micromirror device
ZHANG Yi,YU Qing,ZHANG Kun,CHENG Fang,CUI Chang-cai.Parallel chromatic confocal measurement system based on digital micromirror device[J].Optics and Precision Engineering,2020(4):859-866.
Authors:ZHANG Yi  YU Qing  ZHANG Kun  CHENG Fang  CUI Chang-cai
Affiliation:(College of Mechanical Engineering and Automation, Huaqiao University, Xiamen 361021, China;Institute of Manufacturing Technology, Huaqiao University, Xiamen 361021, China)
Abstract:The chromatic confocal technique has garnered much attention in the field of surface topography measurement due to its high accuracy,resolution,and rapidity of operation.However,the existing chromatic confocal methods are mostly based on single-point measurement,which restricts their measuring efficiencies.To address this shortcoming,parallel chromatic confocal measurement system based on the chromatic confocal technique was proposed and studied in this paper.In this experimental system,DMD was used as an optical beam splitter,a self-developed dispersive tube lens was applied to produce axial dispersion,and a color camera was used as a photoelectric receiving device.A self-developed color conversion algorithm was also used to simultaneously obtain spectral information from multi-confocal-points.Finally,a parallel chromatic confocal measurement experimental platform was constructed,the experimental measurements corresponding to 50μm high steps and self-made steps were performed,and the surface topography restoration experiments were conducted.The experimental results indicate that the axial measuring range of the system is 300μm,and the measuring accuracy is able to achieve micron level.Further,as a 3D measurement system,the proposed technique was verified to be capable of reconstructing the surface topography of a coin based on one-shot.
Keywords:optical measurement  parallel chromatic confocal  Digital Micromirror Device(DMD)  color camera  surface topography measurement
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号