首页 | 本学科首页   官方微博 | 高级检索  
     

室温硫化胶层建模在透镜结构分析中的应用
引用本文:韩旭,吴清文,董得义,陈立恒,吴雪峰.室温硫化胶层建模在透镜结构分析中的应用[J].光学精密工程,2010,18(1).
作者姓名:韩旭  吴清文  董得义  陈立恒  吴雪峰
作者单位:1. 中国科学院,长春光学精密机械与物理研究所,吉林,长春,130033;中国科学院,研究生院,北京,100039
2. 中国科学院,长春光学精密机械与物理研究所,吉林,长春,130033
摘    要:对透射镜结构中室温硫化(RTV)胶层建模方法进行了研究。给出了节点相连(忽略胶层材料)、各向同性材料(三层体单元和一层体单元)和各向异性材料建立胶层材料模型的方法,分别采用3种方法对透射镜镜组建立了有限元模型,并进行了仿真模态分析。搭建了模态试验装置,测试了它的模态参数。结果表明,各向异性胶层材料的建模方法得到的一阶自由模态频率与试验测试的一阶自由模态频率误差只有0.3%,而各向同性材料的三层单元和一层单元建模方法、节点相连建模方法的误差分别达到1.8%,1.2%和13.9%。分析与测试结果表明,胶层材料在有限元分析当中是不可以被忽略的;综合分析显示,各向同性材料一层单元的建模方法减少了模型单元数量,且达到了工程应用的精度要求。

关 键 词:室温硫化胶  有限元分析  模态分析  模态试验  

Application of RTV adhesive modeling to structure analysis of reflective mirror
HAN Xu,WU Qing-wen,DONG De-yi,CHEN Li-heng,WU Xue-Feng.Application of RTV adhesive modeling to structure analysis of reflective mirror[J].Optics and Precision Engineering,2010,18(1).
Authors:HAN Xu  WU Qing-wen  DONG De-yi  CHEN Li-heng  WU Xue-Feng
Affiliation:1.Changchun Institute of Optics;Fine Mechanics and Physics;Chinese Academy of Sciences;Changchun 130033;China;2.Graduate University of Chinese Academy of Sciences;Beijing 100039;China
Abstract:The modeling methods for Room Temperature Vulcanization(RTV)adhesive in a reflective mirror structure were investigated.The modelling methods of node-connection(ignoring RTV adhesive)),isotropy(three elements and one element)and anisotropy materials were introduced,respectively.The Finite Element Analysis(FEA)models of lens sets were established by three methods and the simulated mode was analyzed.Furthermore,the mode test equipment was setup and the mode parameters were tested for lens sets.The results sho...
Keywords:Room Temperature Vulcanization(RTV) adhesive  Finite Element Analysis(FEA)  modal analysis  modal test
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号