| Ni-Cr-B-Si激光熔覆层与H62黄铜基材间显微组织及微区分析 |
| |
| 引用本文： | 余锦.Ni-Cr-B-Si激光熔覆层与H62黄铜基材间显微组织及微区分析[J].光学精密工程,2000,8(1):26-28. |
| |
| 作者姓名： | 余锦 |
| |
| 作者单位： | 中国科学院长春光学精密机械与物理研究所,吉林,长春,130021 |
| |
| 基金项目： | 国家高技术研究发展计划(863计划)，， |
| |
| 摘 要： | 首次探讨了在H62黄铜基材料上激光熔覆镍基合金的可能性.并利用扫描电镜(SEM)对显微组织进行了观察,分析了熔覆层、结合区及热影响区的组织形貌及成分变化.研究结果表明,利用高能量密度的激光束熔覆涂层,使显微组织明显细化.覆层组织主要由r-Ni、Ni3B、CrB、M23(CB)6组成.覆层与基体间形成了冶金结合.基体受温度梯度影响产生了组织粗化的热影响区.
|
| 关 键 词： | 激光熔覆 显微组织 黄铜 |
| 收稿时间： | 1998-11-11 |
| 修稿时间： | : |
Analysis of microstructure between Ni-Cr-B-Si laser cladding layers and H62 brass bases |
| |
| LIU Yao,wu.Analysis of microstructure between Ni-Cr-B-Si laser cladding layers and H62 brass bases[J].Optics and Precision Engineering,2000,8(1):26-28. |
| |
| Authors: | LIU Yao wu |
| |
| Affiliation: | Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Changchun 130022, China |
| |
| Abstract: | The possibility for cladding nickel bases alloy on H62 brass by laser is investigated for the first time. Microstructure was observed by SEM. The structural shape and constituent change of the cladding layer, the bonding zone and the heat-affected zone were analysed. The experimental results show that it is the laser beam of high energy density that make microstructure fined obviously. The cladding layers mostly consist of γ-Ni, Ni3B, CrB, M23(CB)6. There produces metallurgical combination of cladding layers and bases. The heat-affected zone with coarsing structure is caused by the effect of temperature gradient on the bases. |
| |
| Keywords: | laser cladding microstructure brass |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《光学精密工程》浏览原始摘要信息 |
|
点击此处可从《光学精密工程》下载全文 |
