首页 | 本学科首页   官方微博 | 高级检索  
     

锥束螺旋CT半覆盖扫描重建
引用本文:邹晓兵,曾理.锥束螺旋CT半覆盖扫描重建[J].光学精密工程,2010,18(2).
作者姓名:邹晓兵  曾理
作者单位:1. 重庆大学,光电技术及系统教育部重点实验室,ICT研究中心,重庆,400044;重庆大学,光电工程学院,重庆,400044
2. 重庆大学,光电技术及系统教育部重点实验室,ICT研究中心,重庆,400044;重庆大学,数理学院,重庆,400044
基金项目:国家自然科学基金资助项目(No.60672098;No.60972104)
摘    要:锥束螺旋CT能够解决长物体的检测问题,但其视场直径受限于面板探测器的宽度。为扩大锥束螺旋CT的视场直径,提出了一种螺旋CT视场区域半覆盖扫描的重建方法。扫描时,转台首先沿垂直于中心射线和转轴的方向平移一定距离,然后用普通螺旋CT的扫描方式来获得需要的投影数据。接着,利用推广的偏心锥束螺旋FDK算法进行重建,推广后的重建算法与标准的螺旋FDK算法具有同样的计算效率,而且不需要重排投影数据。实验结果表明,锥束螺旋CT半覆盖扫描能够将锥束螺旋CT的视场半径扩大1.86倍;重建图像的质量与使用大面板探测器全覆盖的标准FDK算法基本相当;由于投影数据量的减少,锥束螺旋CT半覆盖扫描的重建时间比使用大面板探测器的标准FDK算法减少了376.66s。因此,锥束螺旋CT的半覆盖扫描可以有效扩大视场直径,且具有较高的计算效率和较少的重建时间。

关 键 词:X射线成像  锥束螺旋CT  半覆盖扫描  偏心FDK算法  

Half-cover scanning and reconstructing for helical cone-beam CT
ZOU Xiao-bing,ZENG Li.Half-cover scanning and reconstructing for helical cone-beam CT[J].Optics and Precision Engineering,2010,18(2).
Authors:ZOU Xiao-bing  ZENG Li
Affiliation:1. ICT Research Center;Key Laboratory of Optoelectronic Technology and System of the Ministry of Education;Chongqing University;Chongqing 400044;China;2. College of Photoelectric Engineering;3. College of Mathematics and Physics;China
Abstract:Cone-beam helical Computed Tomography(CT) can scan a long object,but the conventional scanning mode of X-ray CT imaging is limited by the width of planar detector when a large object is inspected. As an alternative,a scanning and reconstructing algorithm is presented based on the Field of View(FOV) for half-cover scanning to extend the diameter of the FOV for the cone-beam helical CT. In scanning,the gantry is translated horizontally,whose direction is vertical to the central ray and rotary axis. Then the c...
Keywords:X-ray imaging  helical cone-beam CT  half-cover scanning  off-center FDK algorithm  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号