首页 | 本学科首页   官方微博 | 高级检索  
     

两步法测量编码器测角误差
引用本文:佘琳,冯长有,丁林辉.两步法测量编码器测角误差[J].光学精密工程,2004,12(1):66-70.
作者姓名:佘琳  冯长有  丁林辉
作者单位:1. 中国科学院,长春光学精密机械与物理研究所,吉林,长春,130033;中国科学院,研究生院,北京,100039
2. 中国科学院,长春光学精密机械与物理研究所,吉林,长春,130033
基金项目:国防军工技改项目(No.C02S01S)
摘    要:由多面体和自准直仪组成的编码器角度检测系统测量编码器误差,得到的编码器误差中不但包含编码器误差,而且包含多面体检定误差.根据两步法的使用条件,将两步法应用于光电轴角编码器测角误差数据的处理,分别得到多面体检定误差和编码器测角误差,误差分离的结果与采用其他方法得到的结果相近,但用两步法计算需要的测量数据大大减少.比较结果证明,与其他测量方法相比,此方法可以提高测量效率90%以上,缩短检测时间近80%.

关 键 词:光电编码器  轴角编码器  两步法  误差分离  离散傅里叶变换
文章编号:1004-924X(2004)01-0066-05
收稿时间:2003/6/17
修稿时间:2003年6月17日

Measurement of encoder errors with two-step method
SHE Lin.Measurement of encoder errors with two-step method[J].Optics and Precision Engineering,2004,12(1):66-70.
Authors:SHE Lin
Abstract:The encoder errors obtained by measuring the encoder errors with an encoder angular testing system consisting of polyhedrons and an autocollimator, include encoder errors and calibration errors of polyhedrons. According to the conditions for use of two-step method, the two-step method is applied to the processing of photoelectric rotary encoder errors, and the calibration errors of polyhedrons and the encoder errors are separately obtained. The results of error separation are close to the results obtained by other methods, but the volume of data to be measured for use of two-step method is dramatically reduced. The results of comparison show that, in comparison with other methods, this method can be used to improve the measurement efficiency by more than 90%, and shorten the measurement time by nearly 80%.
Keywords:optoelectronic encoders  angle encoders  two-step method  error separation  discrete Fourier transform
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《光学精密工程》浏览原始摘要信息
点击此处可从《光学精密工程》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号