| 三环减速器齿廓间隙角啮合刚度和载荷分配的计算 |
| |
| 引用本文： | 田红亮,朱大林,方子帆.三环减速器齿廓间隙角啮合刚度和载荷分配的计算[J].机械设计与制造,2005(9):19-21. |
| |
| 作者姓名： | 田红亮 朱大林 方子帆 |
| |
| 作者单位： | 三峡大学,机械与材料学院,宜昌,443002 |
| |
| 摘 要： | 在考虑内啮合齿轮副齿廓间隙角的基础上，建立起三环减速器各啮合轮齿上栽荷分配的理论分析模型。使用SHQ40实例计算出在额定载荷工况下作用在各啮合轮齿对上的栽荷，计算结果表明多轮齿同时啮合可提高三环减速器的承栽能力。
|
| 关 键 词： | 三环减速器 齿廓间隙角 载荷分配 |
| 文章编号： | 1001-3997(2005)09-0019-02 |
| 收稿时间： | 2005-01-06 |
| 修稿时间： | 2005年1月6日 |
Tooth profile clearance angle, mesh stiffness and load distribution calculation of three-ring reducer |
| |
| TIAN Hong-liang,ZHU Da-lin,FANG Zi-fan.Tooth profile clearance angle, mesh stiffness and load distribution calculation of three-ring reducer[J].Machinery Design & Manufacture,2005(9):19-21. |
| |
| Authors: | TIAN Hong-liang ZHU Da-lin FANG Zi-fan |
| |
| Abstract: | On the basis of considering the tooth profile clearance angle of inner meshing gear pairs, the theoretic analytical model with load distribution among each meshing tooth of three - ring reducer was established. The load of each meshing tooth pair had been calculated in the condition of the rating load using three - ring reducer with the type of SHQ40. The calculating results show that the multi - tooth engagement can enhance the load - bearing capacity of three - ring reducer. |
| |
| Keywords: | Three -ring reducer Tooth profile clearance angle Load distribution |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
