| 基于UG的孔加工仿真循环及应用 |
| |
| 引用本文： | 王学平.基于UG的孔加工仿真循环及应用[J].机械设计与制造,2005(5):66-67. |
| |
| 作者姓名： | 王学平 |
| |
| 作者单位： | 深圳职业技术学院先进制造技术系,深圳,518055 |
| |
| 摘 要： | 介绍了基于UG／Manufacturing模块的啄钻和断屑钻两种孔加工仿真循环；分析了由仿真循环生成的孔加工刀路及其经后处理生成的NC程序；探讨了仿真循环的特点及应用。
|
| 关 键 词： | UG／Manufacturing 孔加工 啄钻 断屑钻 刀路及后处理 |
| 文章编号： | 1001-3997(2005)05-0066-02 |
| 修稿时间： | 2004年10月12 |
The simulating cycles of drilling and their applications based on UG |
| |
| WANG Xue-piang.The simulating cycles of drilling and their applications based on UG[J].Machinery Design & Manufacture,2005(5):66-67. |
| |
| Authors: | WANG Xue-piang |
| |
| Abstract: | This paper introduces the simulating cycles of the Peck Drill and the Break Chip based on UG/ Manufacturing and analyzes the tool paths created by the simulating cycles and the NC programs by Postprocess, and discusses their features and applications. |
| |
| Keywords: | UG/Manufacturing Simulating cycles Peck drill Break chip Tool paths and postprocess |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
