| 纳米Al2O3对聚四氟乙烯工程材料性能的影响 |
| |
| 引用本文： | 王家序,陈战,秦大同.纳米Al2O3对聚四氟乙烯工程材料性能的影响[J].机械工程材料,2002,26(9):31-33. |
| |
| 作者姓名： | 王家序 陈战 秦大同 |
| |
| 作者单位： | 1. 重庆大学机械传动国家重点实验室,重庆,400044
2. 重庆大学机械传动国家重点实验室,重庆,400044;中国人民解放军后勤工程学院,重庆,400016 |
| |
| 基金项目： | 教育部科学技术重点项目资助(99104) |
| |
| 摘 要： | 用压制和烧结的方法，制备了纳米Al2O3和聚四氟乙烯（PTFE）的复合材料。研究了纳米Al2O3粒子对PTFE的摩擦、磨损、硬度、耐冲击强度等性能的影响。结果表明：纳米Al2O3粒子不仅显著地提高了PTFE耐磨性，而且降低了PTFE的摩擦系数，同时使PTFE的硬度增大。对作用机理进行分析和探讨，提出了“纳米粒子在摩擦磨损表面产生富积及重新嵌入“的观点，为材料的改性研究提供参考。
|
| 关 键 词： | 工程材料 聚四氟乙烯 性能 纳米氧化铝 |
| 文章编号： | 1000-3738(2002)09-0031-03 |
| 修稿时间： | 2001年6月25日 |
Effect of Nano-Al2O3 on the Properties of PTFE Engineering Plastic |
| |
| WANG Jia xu ,CHEN Zhan ,QIN Da tong.Effect of Nano-Al2O3 on the Properties of PTFE Engineering Plastic[J].Materials For Mechanical Engineering,2002,26(9):31-33. |
| |
| Authors: | WANG Jia xu CHEN Zhan QIN Da tong |
| |
| Affiliation: | WANG Jia xu 1,CHEN Zhan 1,2,QIN Da tong 1 |
| |
| Abstract: | The composite material of nano Al 2O 3 and polytetrafluoroethylene (PTFE) was made by the process of pressing and sintering. Effect of nano Al 2O 3 on the friction and wear characteristic of PTFE plastic was studied. At the same time, the hardness of PTFE was measurated in sclerometer. The results showed that nano Al 2O 3 not only decreased the friction coefficient of PTFE, but also greatly reduced the wear of PTFE. And the hardness of PTFE was improved. It proposes the idea of enrichment and re inset in friction and wear surface. |
| |
| Keywords: | nano Al 2O 3 PTFE property effect |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
