| 汽车覆盖件冲压模具并行工程的应用研究 |
| |
| 引用本文： | 孟东菊,段磊,蔡玉俊,王井玲.汽车覆盖件冲压模具并行工程的应用研究[J].现代制造工程,2010(1). |
| |
| 作者姓名： | 孟东菊 段磊 蔡玉俊 王井玲 |
| |
| 作者单位： | 1. 北京电子科技职业学院汽车制造技术系,北京,100029
2. 天津工程师范学院天津市高速切削与精密加工重点实验室,天津,300222 |
| |
| 基金项目： | 天津工程师范学院基金项目 |
| |
| 摘 要： | 分析汽车覆盖件冲压模具开发的一般过程,介绍并行工程(SE)技术的提出和发展,并对汽车覆盖件冲压模具开发应用并行工程技术进行可行性验证.并行工程是缩短汽车覆盖件冲压模具设计制造周期,降低开发成本,提高模具制造质量的一种合理有效的方法.
|
| 关 键 词： | 汽车覆盖件 冲压模具 并行工程 |
Research on the application of simultaneous engineering to the automobile panel dies |
| |
| MENG Dong-ju,DUAN Lei,CAI Yu-jun,WANG Jing-ling.Research on the application of simultaneous engineering to the automobile panel dies[J].Modern Manufacturing Engineering,2010(1). |
| |
| Authors: | MENG Dong-ju DUAN Lei CAI Yu-jun WANG Jing-ling |
| |
| Affiliation: | MENG Dong-ju1,DUAN Lei2,CAI Yu-jun2,WANG Jing-ling2 (1 Automobile Manufacture Department of Technology,Beijing Vocational College of Electronic Science,Beijing 100029,China,2 Tianjin Key Laboratory of High Speed Cutting &Precision Machining,Tianjin University of Technology , Education,Tianjin 300222,China) |
| |
| Abstract: | Analyzes the development process of the automobile panel dies,introduces briefly Simultaneous Engineering(SE).The feasibility of applying the simultaneous engineering in the development of automobile panel dies is proved well in practice.Simultaneous engineering is a reasonable and effective method to shorten the design and manufacture period of the automobile panel dies,lower the development cost,and increase the die manufacturing quality. |
| |
| Keywords: | automobile panel dies Simultaneous Engineering(SE) |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
