| TiAlN涂层铣刀铣削9SiCr钢切削性能试验研究 |
| |
| 引用本文： | 钟平,孙方宏.TiAlN涂层铣刀铣削9SiCr钢切削性能试验研究[J].现代制造工程,2005,99(2):91-92. |
| |
| 作者姓名： | 钟平 孙方宏 |
| |
| 作者单位： | 上海交通大学机械与工程学院,200030 |
| |
| 摘 要： | 采用TiAlN涂层刀具,对合金工具钢9SiCr的高速铣削加工性能进行试验研究,分析铣削速度对铣削力、表面粗糙 度、表面形貌、切屑变形和刀具的磨损的影响。并获得能够保证对其进行高效高精度加工的合理工艺参数。
|
| 关 键 词： | 合金工具钢 铣削 铣削力 表面粗糙度 |
| 文章编号： | 1671-3133(2005)02-0091-02 |
| 修稿时间： | 2004年11月2日 |
An experimental research of milling process of 9SiCr alloy |
| |
| Zhong Ping,Sun Fanghong.An experimental research of milling process of 9SiCr alloy[J].Modern Manufacturing Engineering,2005,99(2):91-92. |
| |
| Authors: | Zhong Ping Sun Fanghong |
| |
| Abstract: | The high-speed cutting performance of 9SiCr alloy steel is analyzed through the milling experiments.The influences of cutting speed on cutting forces,surface roughness,surface microstructure,chip deformation and tool wear have been studied by the experiments.The appropriate cutting parameters in machining this kind of alloy steel with high efficiency and precision have also been obtained. |
| |
| Keywords: | SiCr alloy Milling Cutting force Surface roughness |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
