| 基于MODBUS通信协议的减速器监测系统的开发 |
| |
| 引用本文： | 沃磊,孟国营,汪爱明,石倩,夏云. 基于MODBUS通信协议的减速器监测系统的开发[J]. 仪表技术与传感器, 2008, 0(1): 44-46 |
| |
| 作者姓名： | 沃磊 孟国营 汪爱明 石倩 夏云 |
| |
| 作者单位： | 中国矿业大学(北京)机电与信息工程学院,北京,100083 |
| |
| 摘 要： | MODBUS协议由于得到众多仪表厂家的支持,正在成为仪表及智能终端的工业标准.所设计的减速器监测系统以AT89C55WD单片机为核心处理器实现对传感器采集的减速器油温、油位、冷却水压力、流量等信号处理、显示.采用了MODBUS通信协议设计减速器监测系统的通信程序.选用MAX485来完成单片机与上位机之间通信的接口芯片.给出了基于MODBUS通信的软件流程图及部分软件程序.
|
| 关 键 词： | MODBUS AT89C55WD 减速器 MAX485 通信 MODBUS 通信协议 减速器 监测系统 开发 Communication Protocol Based Reducer System 软件程序 软件流程图 接口芯片 上位机 通信程序 协议设计 显示 信号处理 流量 水压力 冷却 |
| 文章编号： | 1002-1841（2008）01-0044-03 |
| 收稿时间： | 2007-02-25 |
| 修稿时间： | 2007-07-26 |
Development of Inspect System for Reducer Based on Communication Protocol |
| |
| WO Lei,MENG Guo-ying,WANG Ai-ming,SHI Qian,XIA Yun. Development of Inspect System for Reducer Based on Communication Protocol[J]. Instrument Technique and Sensor, 2008, 0(1): 44-46 |
| |
| Authors: | WO Lei MENG Guo-ying WANG Ai-ming SHI Qian XIA Yun |
| |
| Abstract: | MODBUS protocol is becoming the standard of meter and intelligent terminal, because it is supported by many meter manufacturers. It adopted AT89C55WD as the core to design the system for monitoring the temperature and height of the oil, plus the pressure and the flow quantity of the cooling water; adopted the MODBUS protocol to design the communication program of the system. The interface chip of communication was MAX485. The flow chart of the communication program and some program based on MODBUS protocol was provided. |
| |
| Keywords: | MODBUS AT89C55WD gearbox MAX485 communication |
| 本文献已被 维普 万方数据 等数据库收录！ |
