首页 | 本学科首页   官方微博 | 高级检索  
     

集成阻抗识别的介电泳芯片设计及其关键工艺
引用本文:许静,赵湛,刘泳宏.集成阻抗识别的介电泳芯片设计及其关键工艺[J].仪表技术与传感器,2011(11).
作者姓名:许静  赵湛  刘泳宏
作者单位:1. 中国科学院电子学研究所传感技术国家重点实验室,北京100190;中国科学院研究生院,北京100039
2. 中国科学院电子学研究所传感技术国家重点实验室,北京,100190
基金项目:国家自然科学基金(60971071); 国家高技术研究发展计划(863)(2007AA042104)
摘    要:以微粒的阻抗识别为目的,设计出一种三维网格阵列微电极传感器.传感器将介电泳分离与阻抗识别集成在同一芯片上.首先通过介电泳将微粒中的一种分离至测试区域,再通过阻抗信号描述微粒特性.针对芯片关键区域,提出了调节SU8曝光时间以提高阻抗测试有效信号的工艺解决方案.实验表明,SU8最佳曝光时间为70 s.对芯片性能的相关实验表明,芯片可对不同直径的乳胶微粒进行介电泳分离与阻抗识别.

关 键 词:介电泳  阻抗识别  三维  SU8阱

Design of Dielectrophoretic Chip Integrated with Impedance Identification and Critical Problems on Fabrication
XU Jing , ZHAO Zhan , LIU Yong-hong.Design of Dielectrophoretic Chip Integrated with Impedance Identification and Critical Problems on Fabrication[J].Instrument Technique and Sensor,2011(11).
Authors:XU Jing  ZHAO Zhan  LIU Yong-hong
Affiliation:XU Jing1,2,ZHAO Zhan1,LIU Yong-hong1,2(1.State Key Laboratory of Transducer Technology,Institute of Electronics,Chinese Academy of Sciences,Beijing 100190,China,2.Graduate University,Beijing 100039,China)
Abstract:In order to identificate particles by impedance,the design of a three-dimensional grid electrode array sensor was presented.The sensor integrated the dielectrophoretic separation and impedance identification.The characteristic of the particulates was incarnated by the impedance.The particles were characterized by impedance after they were separated to the test area by dielectrophoresis.For the key area of the sensor,the time of SU8 exposure was adjust to improve the efficient signal in impedance test.The ex...
Keywords:dielectrophoresis  impedance identification three-dimensional  SU8 well  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号