| 光纤环温度性能分析软件设计 |
| |
| 引用本文： | 于中权,梁仁仁,岑礼君,张晓亮,邹莉莉,张特,梁永青.光纤环温度性能分析软件设计[J].光学仪器,2017,39(3):53-60. |
| |
| 作者姓名： | 于中权 梁仁仁 岑礼君 张晓亮 邹莉莉 张特 梁永青 |
| |
| 作者单位： | 中国航天科工集团7801研究所,湖南 长沙,410205 |
| |
| 摘 要： | 介绍了影响光纤陀螺温度性能的主要因素—Shupe效应,论述了基于LabVIEW软件设计开发的光纤环温度性能分析软件的程序组成和功能,并利用光纤环温度性能分析软件开展了内外热源两种工作条件下,光纤陀螺温度性能的仿真分析及与光纤陀螺测试结果的对比评价。结果表明,仿真分析结果与光纤陀螺测试结果一致,光纤环温度性能仿真分析软件能够将光纤环有限元分析结果与光纤陀螺输出有机结合。
|
| 关 键 词： | Shupe效应 LabVIEW 有限元 光纤环 |
| 收稿时间： | 2016/8/30 0:00:00 |
Design of the analysis software of the fiber coil temperature characteristic |
| |
| YU Zhongquan,LIANG Renren,CEN Lijun,ZHANG Xiaoliang,ZOU Lili,ZHANG Te and LIANG Yongqing.Design of the analysis software of the fiber coil temperature characteristic[J].Optical Instruments,2017,39(3):53-60. |
| |
| Authors: | YU Zhongquan LIANG Renren CEN Lijun ZHANG Xiaoliang ZOU Lili ZHANG Te and LIANG Yongqing |
| |
| Affiliation: | 7801 Institute of China Aerospace Science and Industry Group, Changsha 410205, China,7801 Institute of China Aerospace Science and Industry Group, Changsha 410205, China,7801 Institute of China Aerospace Science and Industry Group, Changsha 410205, China,7801 Institute of China Aerospace Science and Industry Group, Changsha 410205, China,7801 Institute of China Aerospace Science and Industry Group, Changsha 410205, China,7801 Institute of China Aerospace Science and Industry Group, Changsha 410205, China and 7801 Institute of China Aerospace Science and Industry Group, Changsha 410205, China |
| |
| Abstract: | The Shupe effect that affects the temperature function of the fiber optic gyroscope(FOG) is introduced.The composition and function of the analysis software of the fiber coil temperature characteristic is discussed.The design is based on the LabVIEW software.The simulation analysis and comparative evaluation with the test results of the FOG is carried out by means of the analysis software of the fiber coil temperature characteristic under two kinds of working conditions that the FOG works in and out of the heat source.The results show that the simulation results are consistent with the test results of the FOG.The analysis software combines the output of the FOG with the finite element analytic result of the fiber coil.The analysis of the fiber coil temperature characteristic is intuitive and effective. |
| |
| Keywords: | Shupe effect LabVIEW finite element fiber coil |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《光学仪器》浏览原始摘要信息 |
|
点击此处可从《光学仪器》下载全文 |
|
