| 基于现场总线的网络数控技术 |
| |
| 引用本文： | 周凯,陆启建.基于现场总线的网络数控技术[J].制造技术与机床,1997(10):11-12,15. |
| |
| 作者姓名： | 周凯 陆启建 |
| |
| 作者单位： | [1]清华大学精仪系 [2]南京四开数控设备厂 |
| |
| 摘 要： | 针对国内数控系统和数控机床应用的实际情况，对基于新型控制局部网－现场总线的网络数控技术进行了研究，在此基础上开发了基于ＣＡＮ总线的新型网络数控系统，为进一步开发国产数控生产线和柔性制造系统奠定了必要的技术基础。
|
| 关 键 词： | 现场总线 网络 数控 制造系统 机床 |
Network NC Technology Applicable to On-the-spot Bus |
| |
| Zhou Kai, et al.Network NC Technology Applicable to On-the-spot Bus[J].Manufacturing Technology & Machine Tool,1997(10):11-12,15. |
| |
| Authors: | Zhou Kai |
| |
| Affiliation: | Zhou Kai; et al |
| |
| Abstract: | In view of real application situations of NC system and NC machine tools in China. An research is made on network NC technology applicable to on-the spot bus, based on new local control net A CAN bus based new network NC system is developed on the basis of the research result. It is an important technological foundation for further developing domestic NC production lines and FMS. |
| |
| Keywords: | On-the-spot Bus Network NC Manufacturing System |
| 本文献已被 CNKI 维普 等数据库收录！ |
