| 双柔性臂机器人的建模和主动振动控制 |
| |
| 引用本文： | 谭珍珍,张泉,刘伟健.双柔性臂机器人的建模和主动振动控制[J].江苏机械制造与自动化,2014(1):166-170. |
| |
| 作者姓名： | 谭珍珍 张泉 刘伟健 |
| |
| 作者单位： | [1]南京航空航天大学民航学院,江苏南京210016 [2]南京航空航天大学机电学院,江苏南京210016 |
| |
| 基金项目： | 国家自然科学基金-广东联合基金项目（编号LU0934004）;国家自然科学基金资助项目（编号：51175264） |
| |
| 摘 要： | 针对双柔性臂机器人在操作过程中出现的结构振动和残余振动影响控制精度的问题,提出了采用多组压电换能器对柔性臂进行主动振动的控制方法.设计了基于超声电机驱动的双柔性臂机器人,采用拉格朗日法和假设模态法对双柔性臂进行了动力学建模,并考虑了在协作搬运过程中双柔性臂机器人需要满足的闭链约束条件.提出了采用独立关节PD反馈控制器和正位置反馈控制器相结合的混合控制方法.Matlab仿真表明,所提出的混合控制器能使柔性机器人在准确完成目标物体轨迹运动的同时,实现对柔性臂的振动抑制,提高了双柔性臂机器人的搬运精度和效率.
|
| 关 键 词： | 双柔性臂 刚柔耦合模型 PZT换能器 主动振动控制 |
Dynamic Modeling and Active Vibration Control of Two Cooperating Flexible Robotic Manipulator |
| |
| TAN Zhen-zhenCollege of Civil Aviation,Nanjing University of Aeronautics and Astronautics,Nanjing,China ZHANG QuanCollege of Mechanical and Electronic Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing,China LIU Wei-jian.Dynamic Modeling and Active Vibration Control of Two Cooperating Flexible Robotic Manipulator[J].Jiangsu Machine Building & Automation,2014(1):166-170. |
| |
| Authors: | TAN Zhen-zhenCollege of Civil Aviation Nanjing University of Aeronautics and Astronautics Nanjing China ZHANG QuanCollege of Mechanical and Electronic Engineering Nanjing University of Aeronautics and Astronautics Nanjing China LIU Wei-jian |
| |
| Affiliation: | TAN Zhen-zhen(College of Civil Aviation, Nanjing University of Aeronautics and Astronautics, Nanjing 210016,China) ZHANG Quan(College of Mechanical and Electronic Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016,China) LIU Wei-jian(College of Mechanical and Electronic Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016,China) |
| |
| Abstract: | According to the fact that the two cooperating flexible manipulators are usually suffered unwanted vibration during the operation of high speed and acceleration,This paper uses the multiple lead piezoelectric transducers （PZr） based sensors and actuators mounted on the flexible structure to suppress the structural and residual vibration.The robot with two cooperating rigid-flexible robotic manipulator actuated by ultrasonic motors is designed.Based on the Lagrange principle and the assumed modes method,the dynamic model of the two cooperating robotic manipulators are established in consideration of the closed-chain constraint conditions.Independent joint PD feedback controller combined with positive position feedback controller （PPF） is developed for the system.Matlab simulation results show that the proposed composite controller can be used to achieve the desired trajectory precisely and suppress the unwanted vibration,so that the efficiency and the precision of the manipulator is further improved. |
| |
| Keywords: | cooperating flexible manipulator rigid-flexible dynamic model PZT transducers active vibration control |
| 本文献已被 维普 等数据库收录！ |
|
