| 超高压阀门波纹管的研制 |
| |
| 引用本文： | 张全厚,宋林红,张文良,于翔麟,王雪.超高压阀门波纹管的研制[J].阀门,2021(1):21-23. |
| |
| 作者姓名： | 张全厚 宋林红 张文良 于翔麟 王雪 |
| |
| 作者单位： | 沈阳仪表科学研究院有限公司 |
| |
| 基金项目： | 国家重点研发计划项目资助(2018YFB2004004)。 |
| |
| 摘 要： | 目前国内超高压阀门波纹管的设计还无统一的设计方法,采用有限元法为基础对公称压力42MPa(2500LB)阀门波纹管进行初始设计能够降低研发成本和周期。通过工程试验检测证明采用有限元法对波纹管的设计研发具有实际指导意义。该波纹管的设计方法涉及材料选型到波纹管参数确定及定型的全过程,对超高压阀门波纹管的设计具有通用性。
|
| 关 键 词： | 阀门 金属波纹管 材料 仿真 CAD |
Development of 2500LB Valve Bellows |
| |
| ZHANG Quan-hou,SONG Lin-hong,ZHANG Wen-liang,YU Xiang-lin,WANG Xue.Development of 2500LB Valve Bellows[J].Valve,2021(1):21-23. |
| |
| Authors: | ZHANG Quan-hou SONG Lin-hong ZHANG Wen-liang YU Xiang-lin WANG Xue |
| |
| Affiliation: | (Shenyang Academy of Instrumentation Sciences Co.,L td,Shenyang 110000,China) |
| |
| Abstract: | At present,there is no unified design method for the design of ultra-high pressure valve bellows in China.Using the finite element method as the basis for the initial design of 2500LB valve bellows can reduce the development cost and cycle time.Through engineering test,it is proved that the finite element method has practical guiding significance for the design and development of bellows.The design method of the bellows involves the whole process from material selection to parameter determination and shaping of the bellows,and it is universal to the design of the bellows of the ultra-high pressure valve. |
| |
| Keywords: | metal bellows finite element simulation |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
