| 基于VC++数控插补可视化实现 |
| |
| 引用本文： | 赵有定,李英.基于VC++数控插补可视化实现[J].机械工程师,2008(1):29-31. |
| |
| 作者姓名： | 赵有定 李英 |
| |
| 作者单位： | 华东理工大学,机械与动力工程学院,上海,200237 |
| |
| 摘 要： | 文中介绍了数控插补原理,以直线插补为例,理论分析了插补的宏观运动轨迹,推导出插补运算公式,并在VC 6.0平台下对数控插补运算编程,实现数控插补动态仿真,使其更为直观可视.
|
| 关 键 词： | 数控插补 VC 6.0 动态仿真 可视化 |
| 文章编号： | 1002-2333(2008)01-0029-03 |
| 修稿时间： | 2007年10月20 |
The Realization of Visualization for NC Interpolation Based on VC++ |
| |
| ZHAO You-ding,LI Ying.The Realization of Visualization for NC Interpolation Based on VC++[J].Mechanical Engineer,2008(1):29-31. |
| |
| Authors: | ZHAO You-ding LI Ying |
| |
| Abstract: | The principle of the NC interpolation is introduced in this text firstly. Then exemplified by the linear interpolation, the macro trajectory of the interpolation is analyzed and calculation formulas are deduced. Finally the NC interpolation operators are programmed under the platform of VC 6.0 to realize dynamic simulation, which makes the interpolation more facilitate for visualization. |
| |
| Keywords: | NC interpolation VC 6 0 dynamic simulation visualization |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
