|
|||||
|
|
| 基于双目视觉的塑料零件数模重构研究 | |
| 引用本文： | 何秋奇,杨玉珍,岳晓峰,孙婷婷,张耀平.基于双目视觉的塑料零件数模重构研究[J].机械工程师,2009(2):76-78. |
| 作者姓名： | 何秋奇 杨玉珍 岳晓峰 孙婷婷 张耀平 |
| 作者单位： | 1. 长春工业大学,机电工程学院,长春,130012 2. 四平职业大学,机械工程系,吉林,四平,136000 3. 长春工业大学,机电工程学院,长春,130012;空军航空大学,基础部,长春,130022 |
| 摘 要： | 对双目视觉技术进行了系统阐述，利用双目视觉技术提取塑料零件的三维信息，进行三维模型的重建，并通过试验验证了三维恢复的精度和三维模型重建的效果。 |
| 关 键 词： | 双目视觉 反求工程 摄像机标定 立体匹配 |
Research on 3D Reconstruction of Plastic Part Based on Two CCD Camera Measure System |
|
| HE Qiu-qi,YANG Yu-zhen,YUE Xiao-feng,SUN Ting-ting,ZHANG Yao-ping.Research on 3D Reconstruction of Plastic Part Based on Two CCD Camera Measure System[J].Mechanical Engineer,2009(2):76-78. | |
| Authors: | HE Qiu-qi YANG Yu-zhen YUE Xiao-feng SUN Ting-ting ZHANG Yao-ping |
| Affiliation: | 1.College of Mechanical &Electrical Engineering;Changchun University of Technology;Changchun 130012;China;2.Mechanical Engineering Department;Siping Professional College;Siping 136000;3.Department of Basic Courses;The Avation University of Airforce;Changchun 130022;China |
| Abstract: | Reverse engineering is the process of extracting the solid features from the measured point data of the existing parts. Double camera measure dispose of the two images which gained by the two cameras at the same time, via digital image process such as acquiring the feature, 3D matching to get two images pixels. In the paper, the model of plastic part was reconstructed in system of binocular stereo vision. |
| Keywords: | binocular vision reverse engineering camera calibration stereo matching |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |