| 基于UG与Moldflow的手机外壳注塑模具设计 |
| |
| 引用本文： | 陆金更,王金灿,吴新灿,秦小涛,代洪庆.基于UG与Moldflow的手机外壳注塑模具设计[J].机械工程师,2014(5):118-119. |
| |
| 作者姓名： | 陆金更 王金灿 吴新灿 秦小涛 代洪庆 |
| |
| 作者单位： | 黑龙江八一农垦大学工程学院; |
| |
| 基金项目： | 校级大学生创新创业训练计划项目(xc2013013) |
| |
| 摘 要： | 以手机外壳的注塑模具设计为实例,利用Moldflow软件确定注塑模具的浇注位置.并以注塑填充结果为设计依据,利用UG软件设计手机外壳的成型零件、侧向抽芯机构和冷却系统.达到缩短产品的设计周期,降低开发成本的目的.
|
| 关 键 词： | UG软件 注塑模 模具设计 Moldflow软件 |
Injection Mold Design of Mobile Up-cover Based on UG and Moldflow Software |
| |
| LU Jingeng,WANG Jincan,WU Xincan,QIN Xiaotao,DAI Hongqing.Injection Mold Design of Mobile Up-cover Based on UG and Moldflow Software[J].Mechanical Engineer,2014(5):118-119. |
| |
| Authors: | LU Jingeng WANG Jincan WU Xincan QIN Xiaotao DAI Hongqing |
| |
| Affiliation: | ( College of Engineering, Heilongjiang Bayi Agrieuhural University, Daqing 163319, China ) |
| |
| Abstract: | Taking a mobile phone cover as an example, gate location is determined by the simulation and analysis on Moldflow software. According to the fill simulation analysis results, molding parts cooling system and side core-pulling mechanism are designed by UG software. The method effectively shortens the design cycles and decreases the production cost. |
| |
| Keywords: | UG software injection mold mold design Moldflow software |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
