| 惰气容融—热导法测定烧结氮化硅中氮 |
| |
| 引用本文： | 朱跃进,李素娟. 惰气容融—热导法测定烧结氮化硅中氮[J]. 冶金分析, 2001, 21(2): 1-3 |
| |
| 作者姓名： | 朱跃进 李素娟 |
| |
| 作者单位： | 中国科学院金属研究所, |
| |
| 摘 要： | 粉末压型烧结氮化硅样中氮和氧难以完全释放，其主要原因为烧结氮化硅样与粉末氮化硅样释放动力学条件不同熔融提气过程中选用适当的浴料，可以提高氮氧的释放提取率。单元铁浴和铜浴可改善氮的释放情况，但分析时间长而拖尾。自行配制的五元浴不仅氮的释放提取率高。而且分析时间适中；其最终测试结果与化学法测定结果一致，惰气熔融法结合五元浴能够准确测定烧结氮化硅化硅。本文还对烧结氮化硅样中氧的联测结果进行了讨论。
|
| 关 键 词： | 惰气容融－热导法 烧结氮化硅 五元浴 氮 测定 纳米陶瓷 |
| 文章编号： | 1000－7571（2001）02－0001－03 |
| 修稿时间： | 2000-05-09 |
Determination of nitrogenin sintered block Si3N4 by inert Gas fusion-thermal conductivity method |
| |
| ZHU Yue-Jin,LI Su-juan. Determination of nitrogenin sintered block Si3N4 by inert Gas fusion-thermal conductivity method[J]. Metallurgical Analysis, 2001, 21(2): 1-3 |
| |
| Authors: | ZHU Yue-Jin LI Su-juan |
| |
| Abstract: | The nitrogen and oxygen in sintered block Si 3N 4 can not release so completely as the powder sample at the same heating and extracting condition. That is caused by the dynamic diffrence between the block and the powder. If the suitable bath is applied to heating and extracting procedure, the extracting ratio can be increased. Fe bath or Cu bath can improve the extraction, but the extracting time is still too long. The designed 5 element bath results in not only higher extracting ratio but also the best analysis time. The final result of nitrogen is in good agreement with that of determined by chemical analysis. The nitrogen in the block Si 3N 4 can be determined accurately by inert gas fusion thermal conductivity method combined with 5 element bath. The determination of oxygen in the block sample is also discussed. |
| |
| Keywords: | inert gas fusion thermal conductivity method sintered block Si 3N 4 5 element bath nitrogen |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
