首页 | 本学科首页   官方微博 | 高级检索  
     

Sn掺杂TiO2/ACF复合材料的制备、表征及光催化性能
引用本文:蔺波涛,施冬梅. Sn掺杂TiO2/ACF复合材料的制备、表征及光催化性能[J]. 化工进展, 2016, 35(2): 549-554. DOI: 10.16085/j.issn.1000-6613.2016.02.032
作者姓名:蔺波涛  施冬梅
作者单位:军械工程学院, 河北 石家庄 050003
摘    要:以Ti(OC4H9)4为前体,SnCl4为Sn源,采用胶溶-回流法制备了Sn掺杂的TiO2,利用浸渍提拉法将其负载到活性炭纤维(ACF)表面,并运用SEM、XRD、XPS、DRS等手段对TiO2/ACF复合材料进行表征,考察了复合材料光催化降解气相甲醛的性能。研究结果表明,Sn元素掺入TiO2晶格中,有利于抑制TiO2晶粒的生长,促进TiO2由锐钛矿型向金红石型的转化,光吸收范围发生一定程度红移;HNO3的用量为0.015mol、掺锡量为6%、负载两层的TiO2/ACF-50复合材料在紫外光照射下对甲醛的去除率复合材料可达85.2%,而在可见光下仅为65.3%。

关 键 词:TiO2/ACF复合材料  吸附  催化剂  锡掺杂  
收稿时间:2015-05-22

Preparation and characterization of Sn doped TiO2/ACF photocatalytic composite material
LIN Botao,SHI Dongmei. Preparation and characterization of Sn doped TiO2/ACF photocatalytic composite material[J]. Chemical Industry and Engineering Progress, 2016, 35(2): 549-554. DOI: 10.16085/j.issn.1000-6613.2016.02.032
Authors:LIN Botao  SHI Dongmei
Affiliation:Ordnance Engineering College, Shijiazhuang 050003, Hebei, China
Abstract:Sn/TiO2 was prepared with Ti(OC4H9)4 and SnCl4 by peptization-refluxing method.TiO2 was loaded to the surface of ACF by the use of dip-coating method.TiO2/ACF was characterized by Scanning Electron Microscopy,X-ray Diffraction,X-ray Photoelectron Spectroscopy and UV-VIS- Diffuse Reflectance Spectroscopy,and the degradation of CH2O was investigated. When Sn was incorporated into TiO2,the growth of TiO2 grains was inhibited and the conversion of TiO2 was promoted from anatase to rutile. The range of light absorbed by TiO2 was redshift. When 0.015 mol HNO3 were used and 6% Sn were doped content,the removal rate of CH2O was 85.2 percent by two layer TiO2/ACF-50 under UV irradiation,while that of only 65.3 percent was obtained under the visible light.
Keywords:TiO2/ACF composites  adsorption  catalysis  Sn doped  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《化工进展》浏览原始摘要信息
点击此处可从《化工进展》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号