| 一种新的铣刀刀齿等效直径确定方法 |
| |
| 引用本文： | 朱坚民,李尧,何丹丹,田丰庆,李孝茹. 一种新的铣刀刀齿等效直径确定方法[J]. 中国机械工程, 2018, 29(5): 558 |
| |
| 作者姓名： | 朱坚民 李尧 何丹丹 田丰庆 李孝茹 |
| |
| 作者单位： | 上海理工大学机械工程学院，上海，200093 |
| |
| 基金项目： | 国家自然科学基金资助项目(50975179);上海市科委科研计划资助项目(17060502600)National Natural Science Foundation of China （No. 50975179） |
| |
| 摘 要： | 为确定铣刀刀齿的等效直径，建立了铣刀的等效模型，将铣刀分为刀杆和刀齿两个子结构，基于子结构分析和理论计算的结果建立刀齿等效直径优化的目标函数，采用遗传算法优化确定刀齿的等效直径。以5把不同参数的2刃、3刃和4刃铣刀为研究对象，采用该方法确定刀齿等效直径，据此计算铣刀刀尖点的频响函数，并与等质量法确定的刀齿等效直径所计算的铣刀刀尖点频响函数及其实验值进行对比。分析结果表明，该方法具有更高的计算精度及更好的适用性。
|
| 关 键 词： | 刀齿等效直径 子结构分析 遗传算法 刀尖点频响函数 |
A New Method for Determining Equivalent Diameters of Milling Cutters |
| |
| ZHU Jianmin,LI Yao,HE Dandan,TIAN Fengqing,LI Xiaoru. A New Method for Determining Equivalent Diameters of Milling Cutters[J]. China Mechanical Engineering, 2018, 29(5): 558 |
| |
| Authors: | ZHU Jianmin LI Yao HE Dandan TIAN Fengqing LI Xiaoru |
| |
| Affiliation: | School of Mechanical Engineering, University of Shanghai for Science and Technology,Shanghai, 200093 |
| |
| Abstract: | In order to determine the equivalent diameters of milling cutters, an equivalent model of milling cutters was established, which was divided into tool holder and cutter teeth, then based on structural analysis and results calculated theoretically, the target function of optimizing cutter teeth equivalent diameters was established, and cutter tooth's equivalent diameters were determined using genetic algorithm. Taking several two fluted milling cutters, three fluted ones and four fluted ones with different parameters as the study objects, adopting the proposed method to determine their teeth's equivalent diameters, which were used to calculate their tool point frequency response functions respectively, and comparing the tool point frequency response functions calculated by the proposed method with ones calculated by equivalent mass method and experimental results. It is shown that the proposed method has higher calculation accuracy and better adaptation. |
| |
| Keywords: | cutter tooth equivalent diameter substructure analysis genetic algorithm tool point frequency response function |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《中国机械工程》浏览原始摘要信息 |
|
点击此处可从《中国机械工程》下载免费的PDF全文 |
|
