| 在氢环境中2(1/4)Cr-1Mo钢的断裂特性 |
| |
| 引用本文： | 钟曼英. 在氢环境中2(1/4)Cr-1Mo钢的断裂特性[J]. 化工学报, 2008, 59(2): 426-430 |
| |
| 作者姓名： | 钟曼英 |
| |
| 作者单位： | 中国计量学院 |
| |
| 摘 要： | 研究了在模拟加氢反应器工况条件下，国产加氢反应器壁材料2(1/4)Cr-1Mo钢的断裂特性。应用断裂力学方法，分别测定了原始状态、原始＋电化学渗氢、步冷状态、步冷＋热渗氢试样的断裂韧性KIC;计算了埋入裂纹和表面裂纹的裂纹尖端的应力强度因子KI。结果表明：步冷处理提高了2(1/4)Cr-1Mo钢的断裂韧性，氢降低了2(1/4)Cr-1Mo钢的断裂韧性;只要反应器内壁无表面裂纹，设备运行是安全的。
|
| 关 键 词： | 2(1/4)Cr-1Mo钢 断裂韧性 应力强度因子 埋入裂纹 表面裂纹 |
| 文章编号： | 0438-1157（2008）02-0426-05 |
| 收稿时间： | 2007-04-12 |
| 修稿时间： | 2007-08-03 |
Fracture properties of 2(1/4)Cr-1Mo steel in hydrogen environment |
| |
| ZHONG Manying. Fracture properties of 2(1/4)Cr-1Mo steel in hydrogen environment[J]. Journal of Chemical Industry and Engineering(China), 2008, 59(2): 426-430 |
| |
| Authors: | ZHONG Manying |
| |
| Abstract: | The fracture properties of 2(1/4)Cr-1Mo steel for hydrogenation reactor wall-material were investigated,in the environment of high temperature and pressurized hydrogen.Fracture toughness values were measured for original steel,electrochemically hydrogen charging,step cooled down and step cooled down plus thermally hydrogen charging.Stress intensity factors of crack tip were calculated for burial crack and surface crack by using fracture mechanics.The results showed that step cooled down increased fracture toughness and the presence of hydrogen reduced fracture toughness of 2(1/4)Cr-1Mo steel.Without surface crack in reactor's inside wall the operation of reactor is safe. |
| |
| Keywords: | 2(1/4)Cr-1Mo steel fracture toughness stress intensity factor burial crack surface crack |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《化工学报》浏览原始摘要信息 |
|
点击此处可从《化工学报》下载免费的PDF全文 |
