首页 | 本学科首页   官方微博 | 高级检索  
     

快凝快硬高贝利特硫铝酸盐水泥熟料烧成过程研究
引用本文:兰明章,赵旭东,陈智丰,张振秋,陈桥. 快凝快硬高贝利特硫铝酸盐水泥熟料烧成过程研究[J]. 硅酸盐通报, 2017, 36(9): 2958-2962
作者姓名:兰明章  赵旭东  陈智丰  张振秋  陈桥
作者单位:北京工业大学材料科学与工程学院,北京,100124;唐山北极熊建材有限公司,唐山,063705
基金项目:十三五国家重点研发计划(2016YFB0303504-02)
摘    要:利用XRD和TG-DSC分析相结合的方法,研究了快凝快硬高贝利特硫铝酸盐水泥熟料的烧成过程.研究结果表明:该水泥熟料的烧成温度范围在1250~1350℃之间,即(1300±50)℃,烧成范围与普通硫铝酸盐水泥熟料一样为100℃,但烧成温度要低50℃.当温度在1250℃以上时,硫的分解明显增加,因此快硬快硬高贝利特硫铝酸盐水泥熟料烧成温度不宜超过1350℃,以免硫的分解过多,造成C4A3(S)的分解,降低水泥强度.

关 键 词:高贝利特硫铝酸盐水泥熟料  烧成过程  烧成温度  热分析,

Sintering Process of Rapid Setting and Hardening High Belite Calcium Sulfoaluminate Cement Clinker
LAN Ming-zhang,ZHAO Xu-dong,CHEN Zhi-feng,ZHANG Zhen-qiu,CHEN Qiao. Sintering Process of Rapid Setting and Hardening High Belite Calcium Sulfoaluminate Cement Clinker[J]. Bulletin of the Chinese Ceramic Society, 2017, 36(9): 2958-2962
Authors:LAN Ming-zhang  ZHAO Xu-dong  CHEN Zhi-feng  ZHANG Zhen-qiu  CHEN Qiao
Abstract:The sintering process of new type rapid setting and hardening high belite sulfoaluminate ( HB-CSA) cement was studied by XRD and TG-DSC.Experimental results reveal that the firing temperature of this new cement is 1250-1350 ℃, namely (1300 ±50) ℃, which shares the same sintering range 100℃as calcium sulfoaluminate ( CSA cement , however , 50 ℃lower than the latter .The decomposition of sulfur increased remarkably as the sintering temperature reached beyond 1250 ℃. Therefore , the sintering temperature of HB-CSA cement clinker shouldn 't be beyond 1350 ℃ to avoid a mass of decomposing of sulfur and C 4 A3 (S), leading to the reduction of mechanical strength .
Keywords:high belite calcium sulfoaluminate cement clinker  sintering process  firing temperature  thermal analysis,
本文献已被 CNKI 等数据库收录!
点击此处可从《硅酸盐通报》浏览原始摘要信息
点击此处可从《硅酸盐通报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号