| 丝杠冷滚打变形力影响因素研究 |
| |
| 引用本文： | 李玉玺,李言,崔莅沐,苗志鸿. 丝杠冷滚打变形力影响因素研究[J]. 中国机械工程, 2020, 31(9): 1065-1073 |
| |
| 作者姓名： | 李玉玺 李言 崔莅沐 苗志鸿 |
| |
| 作者单位： | 1.西安理工大学机械与精密仪器工程学院，西安，7100482.西安现代控制技术研究所，西安，710065 |
| |
| 基金项目： | 国家自然科学基金资助项目（51475146,51475366） |
| |
| 摘 要： | 为研究丝杠冷滚打成形过程中滚打轮半径、滚打轮圆角半径和打入量与变形力之间的关系,在丝杠冷滚打成形原理的基础上建立了有限元仿真模型。通过仿真获得单次滚打以及多次滚打成形过程中,变形力随滚打轮半径、滚打轮圆角半径和打入量的变化规律;设计了正交试验,研究打入量、滚打轴转速、滚打轮厚度及工件转速4个因素对变形力的影响规律。在自行设计的冷滚打成形丝杠设备上进行实验,测得变形力的变化趋势与仿真结果基本一致,验证了有限元仿真模型的正确性。
|
| 关 键 词： | 丝杠 冷滚打 滚打轮 变形力 仿真 |
Research on Influence Factors of Cold Roll-beating Forming Forces of Leadscrews |
| |
| LI Yuxi,LI Yan,CUI Limu,MIAO Zhihong. Research on Influence Factors of Cold Roll-beating Forming Forces of Leadscrews[J]. China Mechanical Engineering, 2020, 31(9): 1065-1073 |
| |
| Authors: | LI Yuxi LI Yan CUI Limu MIAO Zhihong |
| |
| Affiliation: | 1.Faculty of Mechanical and Precision Instrument Engineering,Xi'an University of Technology,Xi'an，7100482.Xi'an Modern Control Technology Research Institute，Xi'an，710065 |
| |
| Abstract: | A finite element simulation model was established on the basis of the cold roll-beating forming principles of the leadscrew to study the relationship among the radius of the rolling wheel, the fillet radius of the rolling wheel, the amount of beating, and the deformation forces. The single and multiple rolling forming processes were obtained through simulation and obtaining of the deformation force varying laws with the radius of the rolling wheel, the fillet radius of the rolling wheel and the amount of beating. Through the orthogonal test, the influence laws of the amount of beating, the rotational speed of the rolling shaft, the thickness of the rolling wheel and the rotational speed of the workpiece on deformation forces were studied. The change trend of the measured forming forces was basically consistent with the simulation results, and the correctness of the finite element simulation model was verified by the experiments which were carried out on the self-designed cold roll-beating forming leadscrew equipment. |
| |
| Keywords: | leadscrew； cold roll-beating rolling wheel forming force simulation |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《中国机械工程》浏览原始摘要信息 |
|
点击此处可从《中国机械工程》下载免费的PDF全文 |
|
