Joining of carbon fiber reinforced polymer laminates by a novel partial cross‐linking process |
| |
| Authors: | Judith Moosburger‐Will,Markus G. R. Sause,Robert Horny,Siegfried Horn,Jochen Scholler,Lloren Llopard Prieto |
| |
| Abstract: | Direct joining of partially cross‐linked and freshly infiltrated carbon fiber reinforced epoxy resin plates made from HTA/RTM6 is investigated as function of the partial curing degree. Partial cross‐linking maintains a certain chemical reactivity of the thermosetting resin which can be used for bonding to a second, freshly infiltrated resin part. A final curing cycle guarantees complete cross‐linking of the joined component. The bonding behavior and the interface morphology of the joined plates are analyzed by mechanical testing, acoustic emission analysis and microscopy. A significant dependence of the bonding and interfacial properties on the partial curing degree is found. Very low and very high partial curing degrees (below 70% and above 80%) result in low fracture toughness and discontinuous crack propagation. Intermediate curing degrees between 70% and 80% mainly show high fracture toughness, stable crack propagation and a ripple like interface morphology. The latter is created by the surface morphology of the partially cross‐linked plate with the typical peel‐ply imprint and results in a high contact surface and mechanical interlocking. The combination of chemical reactivity and high contact surface seems to be advantageous for the enhanced fracture toughness and the improved failure mode of samples with intermediate partial curing degree. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42159. |
| |
| Keywords: | composites crosslinking surfaces and interfaces thermosets |
|
|
