| 激光对脉冲MIG焊熔滴过渡的改善作用 |
| |
| 引用本文： | 苏沚汀,李桓,韦辉亮,张玉昌. 激光对脉冲MIG焊熔滴过渡的改善作用[J]. 焊接学报, 2016, 37(9): 91-95 |
| |
| 作者姓名： | 苏沚汀 李桓 韦辉亮 张玉昌 |
| |
| 作者单位： | 1.天津大学 天津市现代连接技术重点实验室, 天津 300072 |
| |
| 基金项目： | 国家自然科学基金资助项目(51175374)，天津市应用基础与前沿技术研究计划资助项目(14JCYBJC19100)，教育部-中国移动科研基金资助项目(MCM20130621)，天津大学-武清区专项科研基金资助项目(2013816008) |
| |
| 摘 要： | 采用脉冲熔化极惰性气体保护焊（MIG）的方法焊接304不锈钢，在试验中利用电信号采集系统和高速摄像进行同步采集，研究熔滴过渡情况. 结果表明，送丝速度调节适当时，可以实现一脉一滴的射滴过渡形式. 送丝速度偏大时，焊接过程中会夹杂部分瞬时短路过渡，短路时间小于1 ms，影响焊接过程的稳定性. 当采用激光-脉冲MIG复合焊时，对瞬时短路现象有改善作用. 在一定范围内，激光功率增加，瞬时短路过渡出现的次数减少，改善作用增强. 当激光功率达到一定阈值时可完全消除瞬时短路现象，实现一脉一滴的过渡形式，焊接过程稳定. 即激光的加入提升了焊接品质与焊接效率.
|
| 关 键 词： | 复合焊接 送丝速度 瞬时短路过渡 高速摄像 |
| 收稿时间： | 2014-08-22 |
Improvement of laser on metal transfer in pulsed MIG welding |
| |
| SU Zhiting,LI Huan,WEI Huiliang and ZHANG Yuchang. Improvement of laser on metal transfer in pulsed MIG welding[J]. Transactions of The China Welding Institution, 2016, 37(9): 91-95 |
| |
| Authors: | SU Zhiting LI Huan WEI Huiliang ZHANG Yuchang |
| |
| Affiliation: | 1.Tianjin Key Laboratory of Advanced Joining Technology, Tianjin University, Tianjin 300072, China2.Tianjin Changtong Bicycle Parts Co. Ltd., Tianjin 301700, China |
| |
| Abstract: | 304 stainless steel was welded by the method of pulsed metal inert gas (MIG) welding, and electrical signals and high speed camera pictures were acquired synchronously in the experiment in order to study the metal transfer. It was found that the projected spray mode of one droplet per pulse could be achieved when the wire feed speed was appropriate. When the wire feed speed was too high, some instantaneous short circuiting transfer mixed in the welding process, and duration time was less than 1 ms, which had a negative effect on the stability of the welding process. The instantaneous short circuiting transfer could be improved by using the method of laser-pulsed MIG hybrid welding. The number of the instantaneous short circuiting transfer decreased with increasie of the laser power, which contributed to improving unfavorable phenomenon. When the laser power reached a certain threshold value, the instantaneous short circuiting transfer could be completely eliminated to achieve the transfer mode of one droplet per pulse, and the welding process was stable. That is, the addition of laser made the welding quality improve and the efficiency increase. |
| |
| Keywords: | hybrid welding wire feed speed instantaneous short circuiting transfer high speed photography |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《焊接学报》浏览原始摘要信息 |
|
点击此处可从《焊接学报》下载免费的PDF全文 |
