| 三熔化极MIG焊的燃弧形式及共有导电通道的建立 |
| |
| 引用本文： | 向婷,李桓,韦辉亮,高莹,娄丽艳. 三熔化极MIG焊的燃弧形式及共有导电通道的建立[J]. 焊接学报, 2016, 37(7): 44-48 |
| |
| 作者姓名： | 向婷 李桓 韦辉亮 高莹 娄丽艳 |
| |
| 作者单位： | 1.天津大学 天津市现代连接技术重点实验室, 天津 300072 |
| |
| 基金项目： | 国家自然科学基金资助项目(51475325)；天津市应用基础与前沿技术研究计划项目(14JCYBJC19100) |
| |
| 摘 要： | 试验中搭建了单电源三熔化极MIG焊系统，利用电信号采集系统检测焊接电流和电弧电压，借助高速摄像系统同步拍摄电弧形态及熔滴过渡过程.通过改变不同的预设电压值，观察到了三种基本的燃弧形式，以此分析三电弧共有导电通道的建立.结果表明，三种基本的燃弧形式依次为单丝燃弧、双丝燃弧及三丝燃弧.共有导电通道的建立分三个阶段，首先三个电极与母材之间形成各自的导电通道，其次三个导电通道在电磁引力的作用下彼此倾斜，打破各自原有导电通道建立共同的导电通道，最后新的导电通道调整至稳定状态.共有导电通道的建立更有利于电弧稳定燃烧.
|
| 关 键 词： | 三熔化极MIG焊 燃弧形式 预设电压 导电通道 |
| 收稿时间： | 2014-09-24 |
The arcing mode in triple-electrode metal inert gas welding and establishment of mutual conducting channel |
| |
| XIANG Ting,LI Huan,WEI Huiliang,GAO Ying and LOU Liyan. The arcing mode in triple-electrode metal inert gas welding and establishment of mutual conducting channel[J]. Transactions of The China Welding Institution, 2016, 37(7): 44-48 |
| |
| Authors: | XIANG Ting LI Huan WEI Huiliang GAO Ying LOU Liyan |
| |
| Affiliation: | 1.School of Materials Science and Engineering, Tianjin University, Tianjin 300072, China2.Tianjin Key Laboratory of High Speed Cutting and Precision Machining, Tianjin University of Technology and Education, Tianjin 300222, China |
| |
| Abstract: | Triple-electrode MIG welding system was established in this paper. The welding current and arc voltage were acquired through a signal acquisition system, and the arc behavior and metal transfer process were monitored with high-speed photography system synchronously. Three basic arcing modes were observed by changing preset voltage, which could be used to analyze the establishment of mutual conducting channel. The experimental results show that the basic arcing forms were single-wire arcing, twin-wire arcing, and triple-wire arcing. The establishment of mutual conducting channel can be divided into three phases. First, the conducting channel was established between three electrodes and base metal, respectively. Second, in order to establish the mutual conducting channel, three conducting channels broke the respective channel under electromagnetic attractive force. Last, a new conducting channel adjusted to steady state. Moreover, the mutual conducting channel could help to stable arc burning. |
| |
| Keywords: | triple-electrode MIG welding arcing mode preset voltage conducting channel |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《焊接学报》浏览原始摘要信息 |
|
点击此处可从《焊接学报》下载免费的PDF全文 |
|
