首页 | 本学科首页   官方微博 | 高级检索  
     

脉冲电沉积制备InSb/Sb超晶格纳米线阵列
引用本文:杨友文,陈延彪,吴玉程,解挺,刘飞. 脉冲电沉积制备InSb/Sb超晶格纳米线阵列[J]. 化工学报, 2011, 62(3): 870-874
作者姓名:杨友文  陈延彪  吴玉程  解挺  刘飞
作者单位:合肥工业大学化学工程学院;合肥工业大学材料科学与工程学院;合肥工业大学机械与汽车工程学院
基金项目:国家自然科学基金项目,安徽省自然科学基金项目
摘    要:采用脉冲电沉积技术在氧化铝模板中制备得到直径60 nm的InSb/Sb超晶格纳米线阵列,并运用扫描电镜、透射电镜和电子能谱仪对其形貌与结构进行了表征与测试。高度有序的InSb/Sb超晶格纳米线长度约为40 μm,其长径比超过600。实验中,通过改变沉积电压与时间达到了对超晶格纳米线组分与结构的控制, 纳米线阵列中In与Sb的原子质量比接近于1/2,在每个周期中,InSb的厚度为12 nm,Sb关 键 词:脉冲电沉积  InSb/Sb超晶格  组分  结构

Fabrication of InSb/Sb superlattice nanowires array by pulsed electrodeposition
YANG Youwen,CHEN Yanbiao,WU Yucheng,XIE Ting,LIU Fei. Fabrication of InSb/Sb superlattice nanowires array by pulsed electrodeposition[J]. Journal of Chemical Industry and Engineering(China), 2011, 62(3): 870-874
Authors:YANG Youwen  CHEN Yanbiao  WU Yucheng  XIE Ting  LIU Fei
Abstract:InSb/Sb superlattice nanowires array with diameter of 60 nm, embedded in anodic alumina membrane (AAM)template were fabricated by pulsed electrodeposition. Morphology and structure characterization of the superlattice nanowires were performed by using scanning electron microscopy (SEM), transmission electron microscopy (SEM)and energy dispersive X-ray spectrometer (EDS).The length of the highly ordered InSb/Sb superlattice nanowires was about 40 μm, and its aspect ratio was more than 600. In this experiment, the components and structure of the InSb/Sb superlattice nanowires were controlled by changing deposition voltage and time.The atomic ratio of In to Sb in the superlattice nanowires was about 1/2, and the thickness of InSb and Sb were 12 nm and 20 nm respectively in each period.The study of the nanowires growth showed that the fabrication parameters, such as temperature and voltage, had a strong influence on the growth of the InSb/Sb superlattice nanowires.And the deposition rate of Sb was higher than that of InSb in the deposition process.
Keywords:
本文献已被 万方数据 等数据库收录!
点击此处可从《化工学报》浏览原始摘要信息
点击此处可从《化工学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号